Philips MCD510/25 user manual Connections, Connecting speakers, Antennas Connection, MW Antenna

Page 12

English

Connections
						FM Antenna
	Step 2: Connecting speakers					FM Antenna

Connect the speaker wires to the SPEAKERS terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to "-". Fully insert the stripped portion of the speaker wire into the terminal as shown.

Notes:

-Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

-For optimal sound performance, use the supplied speakers.

-Do not connect more than one speaker to any one pair of +/- speaker terminals.

-Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

Step 3: Antennas Connection

Connect the supplied MW loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.

MW Antenna

●Position the antenna as far as possible from a TV, VCR or other radiation source.

●For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal.

12

Image 12

Contents DVD Micro Theatre How to connect a plug Important notes for users in the U.KMains plug Copyright in the U.KDVD/WMA-CD/MP3-CD Compatible Klass 1 laseraparat Index English176 Dansk Svenska Italiano Nederlands DeutschContents Clock/Timer Tape Operation/RecordingFeatures Supplied accessoriesGeneral Information Discs for playbackGeneral Information/Maintenance Care and safety informationEnvironmental information Cleaning the disc lens Cleaning the head and the tape pathsFinding a suitable location Demagnetising the headRight LeftPlacing speakers AntennaConnecting speakers ConnectionsAntennas Connection MW AntennaConnecting TV Using Scart jackUsing Composite Video jacks Cvbs English Using S-Video In jack Using an accessory RF modulatorConnecting the power cord Optional Connecting additional equipmentConnecting an active subwoofer B Using the VCR for recording DVDs CControls Controls on the remote control Controls on the systemEcho not for this version KEY not for this version Switching the system on Listening through headphonesSwitching the system to Eco Power Standby mode Power-saving automatic standbyInserting batteries into the remote control Setting the clockUsing the remote control to operate System PreparationsSetting language preference Setting video preferenceConnecting TV To remove the menu Press System MenuNtsc PALAuto VideoUsing the disc menu Disc OperationsPlaying discs Basic playback controls Fast search Programming favorite tracksFor CD/VCD/SVCD Special disc features Playing MP3/ WMA/picture disc Kodak, JpegMixed-mode disc JpegUsing the system menu Setting language preferenceSetting video preference DVD only Setting audioNight Mode turning On / Off Setting RatingOff Use the Numeric Keypad 0-9 to enter the four-digit codeTo change the password To play discs of rating control DVD onlyTo remove the menu Tuning to radio stations Radio ReceptionProgramming radio stations Automatic programmingSetting the RDS clock Scrolling through different RDS informationTape Operation/Recording Tape playbackRewinding / Fast forwarding General information on recordingRecording timer When recording is in progressPreparation for recording Synchro start CD recording for CD onlyClock/Timer Clock settingTimer setting Sleep timer settingSpecifications Troubleshooting English ProblemSolution Check that the speakers are connected correctly Glossary