DVD Menu Operations
English
Using the system menu
To enter the system menu, you should stop playback first.
1 2,3
4
/PROG
1In stop mode, press SYSTEM MENU.
➜ The menu bar will appear across the top of the TV set screen.
Language Video Audio Rating
OSD Menu | English | English |
Subtitle | English | Fran ais |
Audio | English | Espa ol |
Menu | English | Portugu s |
|
| Deutsch |
2Press 22 / 33 / 3/4 on the remote control to navigate in the menu.
➜Press 22 / 33 to move through the menu bar.
➜Press 4 to enter the selection.
3Press OK to confirm the selection.
4Press 38 (PLAY/PAUSE 38 on the remote) to resume playback.
Setting language preference
Please see Page 21.
To select preferred language (DVD only)
When you press AUDIO on the remote control, the channels being played will be displayed on the TV screen.
For example, in the Dolby Digital format, mulitiple signals ranging from monoral to 5.1 channel can be recorded on a DVD.The number of channels may vary depending on the actual DVD.
To display the subtitle (DVD only)
For DVDs recorded in multiple languages, you can change the subtitle language during playback, or turn on or off the subtitle display whenever you want.
For example, you can select the language you understand and turn the subtitle on for better understanding.
Press SUBTITLE repeatedly on the remote control during playback.
Each time you press the button, the language will change.
Notes:
–For some DVDs, you may not be able to change the subtitle languages even if multilingual subtitles are recorded in the disc.
–If your desired language is not set in the disc, you cannot select the languages via this function.
Setting video preference (DVD only)
Please see Pages
Setting audio
To set Priority, please see page 27.
To set Digital Out and PCM 48 KHz
Language Video Audio Rating
Digital Out | PCM |
|
PCM 48KHz | Off |
|
Priority | CD | CD |
Night Mode | Off |
|
| On |
|
1In stop mode, select Audio from the menu bar, and then press OK.
2Press 33 and 3/4 to select PCM or ALL.
Select ALL if you have connected the digital output to a multifunctional decoder receiver.
Select On for PCM 48K if the external component is incapable of processing 96KHz digital signal input, and then convert the standard signal with the sampling rate of 48KHz.
28