Philips MCD510/25 user manual Check that the speakers are connected correctly

Page 38

Troubleshooting

English

Problem

The language for the sound or subtitle cannot be changed when playing a DVD.

No image is output when a function is selected.

Sound cannot be heard or is of poor quality

Poor radio reception.

Recording or playback cannot be made

The tape deck door cannot open

Left and right sound outputs are reversed.

The remote control does not function.

The timer is not working

The Clock/Timer setting is erased

Solution

✔Multi-language sound or subtitle is not recorded on the DVD.

✔Changing the language for the sound or subtitle is prohibited on the DVD.

✔Make sure the component is connected correctly.

✔Press the correct function button for the input source.

✔Adjust the volume.

✔Disconnect the headphones.

✔Check that the speakers are connected correctly.

✔Check if the stripped speaker wire is clamped.

✔If the system is in pause, slow motion or fast forward/reverse mode, press 2; to resume the normal play mode.

✔Make sure the MP3-CD was recorded within 32- 256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz.

✔If the signal is too weak, adjust the antenna or connect an external antenna for better reception.

✔Increase the distance between the System and your TV set or VCR.

✔Clean deck parts, see “Maintenance”.

✔Use only NORMAL tape.

✔Apply a piece of adhesive tape over the missing tab space.

✔Remove and reconnect the AC power plug and switch on the system again.

✔Check the speaker connections and location.

✔Point the remote control at the remote control sensor of the unit.

✔Reduce the distance to the player.

✔Remove any possible obstacles.

✔Replace the batteries with new ones.

✔Check that the batteries are loaded correctly.

✔Set the clock correctly.

✔If recording is in progress, stop it

✔Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.

38

Image 38

Contents DVD Micro Theatre Mains plug How to connect a plugImportant notes for users in the U.K Copyright in the U.KDVD/WMA-CD/MP3-CD Compatible Klass 1 laseraparat 176 IndexEnglish Dansk Svenska Italiano Nederlands DeutschContents Clock/Timer Tape Operation/RecordingGeneral Information FeaturesSupplied accessories Discs for playbackEnvironmental information General Information/MaintenanceCare and safety information Finding a suitable location Cleaning the disc lensCleaning the head and the tape paths Demagnetising the headPlacing speakers RightLeft AntennaAntennas Connection Connecting speakersConnections MW AntennaUsing Composite Video jacks Cvbs Connecting TVUsing Scart jack English Using S-Video In jack Using an accessory RF modulatorConnecting an active subwoofer B Connecting the power cordOptional Connecting additional equipment Using the VCR for recording DVDs CControls Controls on the remote control Controls on the systemEcho not for this version KEY not for this version Switching the system to Eco Power Standby mode Switching the system onListening through headphones Power-saving automatic standbyUsing the remote control to operate System Inserting batteries into the remote controlSetting the clock PreparationsConnecting TV Setting language preferenceSetting video preference To remove the menu Press System MenuAuto NtscPAL VideoPlaying discs Using the disc menuDisc Operations Basic playback controls For CD/VCD/SVCD Fast searchProgramming favorite tracks Special disc features Playing MP3/ WMA/picture disc Kodak, JpegMixed-mode disc JpegSetting video preference DVD only Using the system menuSetting language preference Setting audioOff Night Mode turning On / OffSetting Rating Use the Numeric Keypad 0-9 to enter the four-digit codeTo remove the menu To change the passwordTo play discs of rating control DVD only Programming radio stations Tuning to radio stationsRadio Reception Automatic programmingSetting the RDS clock Scrolling through different RDS informationRewinding / Fast forwarding Tape Operation/RecordingTape playback General information on recordingPreparation for recording Recording timerWhen recording is in progress Synchro start CD recording for CD onlyTimer setting Clock/TimerClock setting Sleep timer settingSpecifications Solution TroubleshootingEnglish Problem Check that the speakers are connected correctly Glossary