Clock/Timer
ECO POWER | RECORD | BAND | CLOCK SET |
| DISPLAY | RDS | |
| M C D 5 1 0 M I C R O S Y S T E M |
|
|
iR
ALBUM / PRESET | TUNING |
| VOLUME |
|
TIMER SET |
|
|
| /PROG |
|
|
|
| |
SOURCE | PROGRAM | DSC | DBB |
|
|
|
| INCREDIBLE |
|
|
|
| SURROUND |
|
|
|
| IS | DSC |
English
Clock setting
See page 20.
Timer setting
●The system can be used as an alarm clock, whereby the CD,TUNER or TAPE is switched on at a set time (one time operation).The clock time needs to be set first before the timer can be used.
1In standby mode, press and hold TIMER SET3 (TIMER on the remote) for more than two seconds.
➜ “SELECT SOURCE” scrolls followed by the last selected source.
2Press SOURCE to select your desired source and press TIMER SET3 (TIMER on the remote) to confirm.
➜ “SET ON TIME” scrolls followed by “ON 0 : 00”.
3Press TUNING S/T to set the hours and press TIMER SET to confirm.
4 Press TUNING S/T to set the minutes and press TIMER SET to complete the setting.
➜The timer is now set and activated.
Activating and deactivating timer
●In standby or during playback, press TIMER SET3 (TIMER on the remote) once.
➜ Display shows 
if activated, and disappears if deactivated.
Sleep timer setting
The sleep timer enables the system to switch off by itself after a set period of time.
1Press SLEEP on the remote control repeatedly to select a preset time.
➜The selections are as follows (time in minutes):
90 ™ 80 ™ 70 ™ 60 ™ 50 ™ 40 ™ 30 ™ 20 ™ 10 ™ OFF
➜"SLEEP XX" or "OFF" is displayed. "XX" is the time in minutes.
2When you reach the desired length of time, stop pressing the SLEEP button.
To deactivate the sleep timer
●Press SLEEP repeatedly until "OFF" is displayed, or press ECO
35