Philips DVP 5965K user manual Receiver has a Dolby Digital or DTS decoder, Helpful Hint

			Connections
Optional: Connecting to a Multi-			Optional: Connecting to a Stereo	h
channel Receiver			System	lis
				Eng
AV Receiver
			STEREO
			AUDIO
			IN
			DIGITAL
MULTICHANNEL AUDIO IN
FRONT	REAR	CENTER
R		R
L		L
FRONT	REAR	SUBW.

Receiver has a Dolby Digital or DTS decoder

1Select one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your TV.

2Connect the Audio Out Left and Right jack for Front and Rear speakers to the corresponding input sockets on your Receiver (cable supplied).

3Connect the Audio Out for Center speaker and Subwoofer to the corresponding inputs on your Receiver (cable not supplied).

4Set the DVD Player’s Analog Output to ‘Multichannel’ to enable playback of DVDs recorded in Multi-channel. (see page 35 “Setting the analogue output”).

Helpful Hint:

–If the subwoofer is equipped with its own amplifier, the Subwoofer connection should be connected directly to the subwoofer.

Stereo system has Dolby Pro Logic or Right / Left Audio In jack

1Select one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your TV.

2Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable supplied).

11

01-47_DVP5965K_93_eng4 11 13/02/06, 2:39 PM