Getting Started
5Select an item and press OK.
➜ Follow the instructions shown on the TV to confirm the selection (if any).
Helpful Hints:
–Before changing the current TV Standard setting, ensure that your TV supports the ‘selected TV Type’ system.
–If there is no proper picture on your TV, wait for 15 seconds for auto recovery.
CHANGING PAL TO NTSC:
1.ENSURE THAT YOUR TV SUPPORTS NTSC STANDARD.
2.IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVERY.
OK |
| CANCEL |
CONFIRM AGAIN TO USE NEW TV
TYPE SETTING.
OK |
| CANCEL |
To reset to default TV colour system manually:
●Wait for 15 seconds for auto recovery.
OR
1Press and hold EJECT 0 on the DVD player to open the disc tray.
2When the disc is ejected, press and hold EJECT 0 again, and numeric keypad ‘3’ on the remote control for few seconds.
➜The DVD background screen appears on the TV.
E n g l i s h
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
19
19 | 13/02/06, 2:40 PM |