Philips DVP 5965K Playing discs, Basic playback controls, Pausing playback, Stopping playback

Disc Operations

E n g l i s h

Playing discs

1Connect the power cords of the DVD Player and TV (and any optional stereo or AV receiver) to a power outlet.

2Turn on the TV power and set to the correct Video In channel. (See page 17 “Setting up the TV”).

3Press STANDBY-ONto turn on the DVD player.

➜ The DVD background screen appears on the TV.

4Insert a disc in the disc slot.

5Place a disc into the disc tray with the lable facing up.

➜ For double-sided discs, load the side you want to play facing up.

6Playback will start automatically. If not press PLAY/PAUSE 2; .

➜If a disc menu appears on the TV, see page 23 “Using the Disc Menu”.

➜If the disc is locked by parental control, you must enter your six-digit password. (See page 42).

●For more playback features, see pages 23– 31.

Basic playback controls

Unless otherwise stated, all operations described are based on Remote Control use.

Pausing playback

1During playback, press PLAY/PAUSE 2; to pause playback and display a still picture.

➜ Sound will be muted.

2To resume normal playback, press PLAY/PAUSE 2; again.

Selecting track/chapter

●Press PREV J / NEXT K to go to the previous or next track/chapter.

●In STOP mode, press DISPLAY to display the disc information text line for title/chapter/track (example - 00/08).

●Use alphanumeric keypad (0-9) to enter valid title/chapter/track number, then press OK.

➜ The playback skips to the selected title/chapter/track.

Stopping playback

●Press STOPÇ.

Helpful hints:

–Screen saver will start automatically if the disc playback is stopped/paused for 5 minutes.

–The player will automatically switch to Power Standby mode if you do not press any buttons for 15 minutes after the disc has stopped playing.

TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.

22

01-47_DVP5965K_93_eng4 22 13/02/06, 2:40 PM