Philips DVDR3380 Channel Setup settings, Automatically scan all the receivable analogue local TV

DVD System Menu Options (continued)

CHANNEL SETUP settings

Channel Search			Automatically scan all the receivable analogue local TV
			channels and store these channels on the recorder.
System Menu - Channel Setup
			Use ST keys to highlight { Channel Search } and press OK.
	Channel Search	Search
	Modify Channel Information		The automatic TV channel search starts. This process may take
		Edit
	Sort Channels		several minutes. Once complete, the total number of channels found
		Sort
			and stored appears on the TV.

English

Modify Channel Information

Channel
Name	P001/Ch003
Scan mode	Frequency
Frequency	55.26MHz
TV System	PAL B/G
NICAM	On
Audio	DUAL A
Decoder	Off
Skip	No
Fine-tune

OK Cancel OK

Adjust a stored TV channel to your preference, improve the reception and the sound quality of that TV channel.

1)Use ST keys to highlight { Modify Channel Information } and press OK.

The channel menu appears.

2)Use ST keys to select one of the options.

{ Name }	– You can use the numeric keypad 0-9 to select
	the channel preset number which you wish to
	change.

–Use STkeys to change alphabet/ number and use WX keys to select different entry fields, then press OK to confirm.

{Scan Mode } – Select TV channel search mode based on channel allocation or frequency.

–Use ST keys to select { Frequency },

{ Channel } or { S-Channel} (Special Channel), then press OK to confirm.

{Frequency } – Shows the frequency of the current TV

channel.

– If required, use WX keys to start the automatic frequency search and press OK to confirm.

{TV System } – Set the TV system that produces the least

distortion of picture and sound.

– Use ST keys to select a suitable sound mode, then press OK to confirm. (See chapter “TV System Guide” at the back of this manual for more information).

{ NICAM }	– Turn on or off the digital sound transmission
	system which improves the sound quality of the
	TV channel.
	– Use ST keys to select { On } or { Off }, then
	press OK to confirm.

53