Philips DVDR3380 Channel Setup settings Modify Channel Information, Sort Channels, Audio, Skip

English

DVD System Menu Options (continued)

CHANNEL SETUP settings (continued)

Modify Channel

Information

Channel
Name	P001/Ch003
Scan mode	Frequency
Frequency	55.26MHz
TV System	PAL B/G
NICAM	On
Audio	DUAL A
Decoder	Off
Skip	No
Fine-tune

OK Cancel OK

{ Audio }	– For bilingual TV programmes, you can switch
	between stereo (original) and additional audio
	language.

– Use ST keys to select { DUAL A } or { DUAL B }, then press OK to confirm.

{Decoder } – If you have connected the recorder with an external decoder, set it to { On } and press OK to confirm.

{ Skip }	– Select this to set the channel to be skipped.
	The skipped channels can only be accessed by
	pressing the corresponding number key on
	the remote control.

–Use ST keys to choose { Yes } if you wish to skip this channel, then press OK to confirm.

{Fine-Tune} – Select this to fine-tune the TV channel manually if the reception is poor.

–Use WX keys to adjust the frequency.

Sort Channels

Sort Channels

P001	BC020	Skip
P002	SW006	Unskip
P003	CH008	Unskip	P003 CH008 Unskip
P004	CH004	Unskip
P005	GG006	Skip
P006	CH010	Unskip
P007	CH012	Unskip
P008	CH005	Unskip

3) To confirm all settings, select OK and press OK.

Rearrange all stored TV channels.

1)Use ST keys to highlight { Sort Channels } and press OK. The list of TV channel programmes appears.

2)Use ST keys to highlight the channel you want to change and press OK.

The selected channel will move to the right side of the screen.

3)Use ST keys to shift the TV channel to the desired position and press OK again.

The selected channel will be inserted before the current position.

4)Repeat steps B~C until you have sorted all the TV channels you want.

5)Press RETURN on the remote control to go back to the previous menu.

54