Philips DVD963SA manual 162037.eps, 5 P50 Loop-Back Test

EN 24 5. DVD963SA Diagnostic Software, Trouble Shooting and Test Instructions

pressed the PLAY key. Pressing the PLAY key, before pressing a key on the remote control, gives an error in the remote control test (note that the remote control test will also fail if a key on the remote control was pressed but no code was received). The remote control test does not check upon the contents of the received code, that is it will not be checked if the received code matches the key pressed. If desired, the user can manually check this code by using a code-table for the remote control key-codes.

RC Key id	Hexadecimal code
STANDBY	0C
1	1
2	2
3	3
4	4
5	5
6	6
7	7
8	8
9	9
0	0
RETURN	83
DISPLAY	EF
DISC MENU	54
SYSTEM MENU	82
CURSOR UP	58
CURSOR DOWN	59
CURSOR LEFT	5A
CURSOR RIGHT	5B
OK	5C
PREVIOUS	21
NEXT	20
STOP	31
PLAY	2C
PAUSE	30
SUBTITLE	4B
ANGLE	85
ZOOM	F7
AUDIO	4E
REPEAT	1D
REPEAT A-B	3B
SHUFFLE	1C
SCAN	CL165322A

162_037.eps

080102

Figure 5-12

CL 96532065_013.eps 120799

Figure 5-13

Or

CL 96532065_014.eps 120799

Figure 5-14

Pressing PLAY on the local keyboard again will proceed to the next test.

5.3.5P50 Loop-Back Test

For the P50 loop-back test, the user must first press a key to decide if the test is to be performed.

The display will show the following message:

CL 16532007_004.eps 090102

Figure 5-15

If the user presses STOP, the P50 test will be skipped.

If the user presses OPEN/CLOSE, the P50 test is performed and the result is displayed as follows:

Test successful:

CL 16532007_005.eps 090102

Figure 5-16

Test fails:

CL 16532007_006.eps 090102

Figure 5-17

Press the PLAY key to continue to the next text

After pressing PLAY, the result of the remote control test is displayed on the local display of the DVD player as follows: