Philips DVD963SA manual SMA Error Codes, Reprogramming of New Mono Boards

Diagnostic Software, Trouble Shooting and Test Instructions DVD963SA 5. EN 29

Error
Code	Error name	Explanation
0008	SP_CONTINU	Sequence of sectors coming
	ITYERROR	from disc is incorrect. Reason:
		see SP_SYNCERROR
0009	DMX_CONTI	Sequence of sectors is incorrect.
	NUITYERRO	Reason: problem with buffer
	R	RAM
000A	LLD_ERROR	An illegal audio format was
		offered to the decoder. Reason:
		unknown audio type on disc or
		problem with buffer RAM
000B	BCU_ERROR	Internal problem in Furore chip

SMA Error Codes

Error
Number	Error name	Explanation
0000	SMA_TIMEO	Data coming from disc not in
	UTERROR	time. Reason: damaged disc or
		engine problem.

5.6.2Reprogramming of New Mono Boards.

Caution

This information is confidential and may not be distributed. Only a qualified service person should reprogram the mono board.

After reset of NV-memory or repair of the mono board, all the customer settings and also the region code will be lost.

Reprogramming of the mono board will put the player back in the state in which it has left the factory, i.e. with the default settings and the allowed region code.

Reprogramming is limited to 25 times

When the counter reaches 25, reprogramming is not possible anymore Reprogramming will be done by way of the remote control.

Put the player in stop mode, no disc loaded. Press the following keys on the remote control: <PLAY> followed by numerical keys <1> <5> <9> The display shows: “- - - - - - - - - - -”

Press now successively the following keys :

for DVD963SA /001 : <2><2><2> <0><1><2><0><0>

for DVD963SA 171 : <1><1><1> <0><1><0><0><0>

for DVD963SA 691 : <3><2><3> <0><1><0><0><0>

Press <PLAY> again.

The TV screen will become BLUE during a short time to confirm that the mono board has been reprogrammed.

CL 26532105_053.eps 280802

Figure 5-35 Reprogamming code