Philips MCD290 manual Playing discs, Is not available on the current disc at the current time

19

In stop mode, press STOP

9 again.

●

For VCD with Playback Control (PBC) feature (version 2.0 only)

PBC playback allows you to play Video CDs interactively, following the menu on the display.

● During playback, press DISC MENU.

➜ If PBC was ON, it will switch to OFF and continue playback.

➜ If PBC was OFF, it will switch to ON and return to menu screen.

Basic playback controls

Pausing playback (DVD/VCD/CD/MP3)

1 During playback, press PLAY/PAUSE 2;.

➜ Playback will pause and sound will be muted.

2 Press PLAY/PAUSE 2; again to resume.

Selecting a track/chapter/title (DVD/

VCD/CD/MP3)

1 Press PRESETí/ë during playback to go to the previous or next chapter/title/track.

2 To go directly to any chapter/ title/track, enter the chapter/ title/track number using the Numeric Keypad (0-9).

Resuming playback from the last

stopped point (DVD/VCD/CD/MP3)

● In stop mode and when a disc has not been removed, press PLAY/PAUSE 2;.

To cancel resume mode

Press DISC MENU on the remote.

●

Keypad (0-9)on the remote.

➜ Playback will start automatically.

To access or exit the menu

OK or Numeric

Use 22/33/5/4 and

●

Disc Operations

Using the disc menu

For disc with Table Of Contents, a menu may appear on the TV screen once you load the disc.

To select a playback feature or item

IMPORTANT!

–This system is designed for regular discs.Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the disc mechanism.

–Do not move the system during playback. Doing so may damage the system.

–DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc matches the regional code of your player.

–According to the format requirement of DVD or VCD, some operations may be different or restricted.

–Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction.

–If appears on the TV screen when a button is pressed, it means the function

is not available on the current disc at the current time.

Playing discs

1Connect the power cords of the system and TV (or any optional stereo or AV receiver) to a power outlet.

2Turn on the TV power and set to the correct Video In channel. (See "Setting up the TV".)

3Press STANDBY ON 2 on the DVD Player front panel or 2 on the remote.

➜ You should see the blue Philips DVD background screen on the TV.

4Press OPEN•CLOSE3 to open the disc door and load in a disc, then press the same button again to close the disc door.

➜ Make sure the label side is facing up.

5Playback will start automatically (depending on the disc type).

➜If a disc menu appears on the TV, see "Using the Disc Menu".

➜If the disc is locked by parental control, you must enter your four-digit password. (See "SYSTEM SETUP-PASSWORD".)

6At any time, simply press STOP 9 to stop playback.

English