English
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.
Problem
No power.
“NO DISC” is displayed.
No picture.
Distorted or poor picture.
The aspect ratio of the screen cannot be changed even though you have set the TV shape.
The DVD player does not start playback.
The DVD player does not respond when buttons are pressed.
Solution
✔Check if the AC power cord is properly connected.
✔Check if the disc is inserted upside down.
✔Wait until the moisture condensed at the lens has cleared.
✔Replace or clean the disc, see “Maintenance”.
✔Use a readable disc or correctly recorded format
✔Select the appropriate video input mode on the TV set.
✔Check if the TV set is switched on.
✔Check the video connection.
✔Check if the system is securely connected.
✔Sometimes a slight picture distortion may appear. This is not a malfunction.
✔Clean the disc.
✔Connect the system to the
✔The aspect ratio is fixed on the DVD disc.
✔The aspect ratio may not be changed for some TV systems.
✔Insert a readable disc.
✔Check the disc type, color system and region code.
✔Clean the disc.
✔Place the disc with the playback side down.
✔Press SYSTEM MENU to turn off the setup menu.
✔Cancel the parental control rating function or change the rating level.
✔Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour.
✔Disconnect the power plug from the jack, and insert again.
34