Tape Operation/Recording
2 | T H E A T H R E |
Tape playback
1Select TAPE source.
➜ Display shows throughout tape operation.
2Open the tape key flap marked
“OPEN•CLOSE” on the front panel.
3Press down STOP•OPENÇ0 to open the tape door.
4Insert a recorded tape and close the tape door. ● Load the tape with the open side downward and
the full spool to the left.
5Press PLAY 2 to start playback.
●The key is automatically released at the end of a tape, except if PAUSE; has been activated.
6To pause, press PAUSE;. Press again to resume.
7By pressing à or á on the system fast winding of tape is possible in both directions.
8To stop the tape, press STOP•OPENÇ0.
General information on recording
●For recording, use only NORMAL (IEC type I) tapes on which the tabs have not yet been broken.This deck is not suitable for recording on METAL (IEC IV) type tapes.
●The best recording level is set automatically. Altering the VOLUME, INCREDIBLE SURROUND or DBB will not affect the recording in progress.
●At the very beginning and end of the tape, no recording will take place during the 7 seconds when the leader tape passes the recorder heads.
●To protect a tape from accidental erasure, have the tape in front of you and break out the left tab. Recording on this side is no longer possible. If, however, you wish to record over this side again, cover the tabs with a piece of adhesive tape.
●The making of unauthorized copies of copy- protected material, including computer programmes, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence.This equipment should not be used for such purposes.
IMPORTANT!
Recording is permissible if copyright or other rights of third parties are not infringed upon.
English
29