Other Functions
En gli sh
Setting the Sleep Timer
The sleep timer enables the system to switch to standby mode automatically at a preset time.
●Press SLEEP repeatedly until it reaches the desired preset
➜The selections are as follows (time in minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120
™OFF ™ 15 …
➜“SLEEP” icon will be shown on the display, except if "OFF" is selected.
To check or change the setting
●Press SLEEP once to show the remaining time before switching off. If you continue pressing the SLEEP button, the next Sleep Timer option will appear.
To cancel the sleep timer
●Press SLEEP repeatedly until "OFF" appears or press the STANDBY ON button.
Sound Control
IMPORTANT!
For proper surround sound, make sure the speakers and subwoofer are connected (see page 7).
Selecting surround sound
●Press SURROUND to select multichannel surround or stereo mode.
➜The availability of the various surround sound modes depends on the number of speakers used and the sound available on the disc.
➜The center and surround speakers operate only in
➜The available output modes for multi- channel include: Dolby Digital, Dolby Pro Logic or Dolby Pro Logic II surround sound.
➜Stereo broadcasts or recordings will produce some surround channel effects when played in a surround mode.
However, mono (single channel sound) sources will not produce any sound from the rear speakers.
30