
Connecting to the mains / Switching ON and to standby
Connecting to the mains
After connecting all desired equipment as described, you can connect the Media Center to a wall socket.
1 Make sure all connections have been made before con- necting the Media Center to the mains supply.
2 First connect the mains lead to the
> The Standby/On indicator (on the
>The Media Center is now in low power mode, consuming only a minimum amount of power.
Switching ON
•To switch on the Media Center from
> The Standby/On indicator (1) goes out.
•Press the y
Switching to standby
•When the Media Center is switched on (Standby/On indicator out), press the y Standby key (1) on the remote control to place the Media Center in standby mode.
>The Standby/On indicator (1) lights up red.
•To switch the Media Center on again from standby mode, press the y Standby key (1) on the remote control again or the y
>The Standby/On indicator (1) goes out.
Note: In both
17