DVD Setup Menu Options (continued)
Programming disc tracks (not for Picture CD/MP3)
You can play the contents of the disc in the order you want by programming the playing order of the tracks. Up to 20 tracks can be stored.
If you want to remove a track
6 Use 1 2 3 4 keys to move the cursor to the track you want to remove.
7 Press OK to remove this track from the programme menu.
To start programme playback
E n g l i s h
1 Press PROG on the remote.
OR
In ‘General Setup Page’, use 34keys to highlight { Program }, then press 2 to select { Input Menu }.
2 Press OK to confirm.
6
27
8
9
10
Exit Start Next 
To programme your favourite tracks/ chapter
3 Use the numeric keypad
4 Use 1 2 3 4 keys to move the cursor to the next position.
➜If the total programme tracks are more than ten, press T to open the next page and proceed with programming or,
➜Use 1 2 3 4 keys to highlight
{Next } on the programme menu, then press OK.
5Repeat steps 3~4 to input another track/chapter number.
8Use 1 2 3 4 keys to highlight { Start } on the programme menu, then press OK. ➜ Playback will start with the selected tracks under the programmed sequence.
To exit programme playback
9 Use 1 2 3 4 keys to highlight { Exit } on the programme menu, then press OK.
OSD Language
This menu contains various language options for the language displayed on the screen. For details, see page 20.
TIPS: The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP.
31
31 | 20/09/05, 9:58 AM |