Basic Connections (continued)
E n g l i s h
Step 4: Connecting FM/MW antennas
fix the claw
into the slot
➠ 
FM
antenna
2
MW 1 antenna
Pr | Y |
Pb
Step 5: Connecting the power cord
TV
1
2 | DVD system |
VOLTAGE SELECTOR
Pr | Y |
L |
|
R
at the bottom of the DVD system
1 Connect the supplied MW loop antenna to the MW socket. Place the MW loop antenna on a shelf, or attach it to a stand or wall.
2 Connect the supplied FM antenna to the FM socket. Extend the FM antenna and fix its ends to the wall.
For better FM stereo reception, connect an external FM antenna (not supplied).
Helpful Hints:
–Adjust the position of the antennas for optimal reception.
–Position the antennas as far as possible from your TV,VCR or other radiation source to prevent unwanted interference.
After everything is connected properly,
1 Set the VOLTAGE SELECTOR to the local power line voltage.
2 Plug in the AC power cord to the power outlet.
The red Eco Power LED on the DVD system will light up. Never make or change any connections with the power switched on.
Helpful Hint:
–Refer to the type plate on the rear or bottom of the system for identification and supply ratings.
12
12 | 20/09/05, 9:57 AM |