Tuner Operations
E n g l i s h
IMPORTANT!
Make sure the FM and MW antennas are connected.
Tuning to radio stations
1 Press TUNER on the remote (or press SOURCE control at the front panel) to select “FM” or “MW”.
2 Press 3 / 4 briefly on the remote.
➜The display panel will show "SEARCH" until a radio station with sufficient signal strength is found.
3 Repeat step 2 if necessary until you find the desired radio station.
4 To tune to a weak station, press 1 / 2 briefly and repeatedly until an optimal reception is found.
Presetting radio stations
You can store up to 40 FM and 20 MW preset radio stations in the memory.
Helpful Hints:
–The system will exit presetting mode if no button is pressed within 20 seconds.
–If no valid frequency is detected during Plug and Play," PLEASE CHECK FM/MW ANTENNA" appears.
Using the Plug and Play
Plug and Play allows you to store all available radio stations automatically.
DVD system’s
display panel
1 
AUTO INSTALL.. 
2 
START..
1 For first time setup, press TUNER.
➜ "AUTO INSTALL PRESS PLAY" appears.
2 Press PLAY B until "START ..." appears on the display panel.
➜ The system will start searching from FM band and followed by MW band.
All the available radio stations with strong signal strength will be stored automatically.
➜ Once complete, the last tuned radio station will play.
40
40 | 20/09/05, 9:59 AM |