Philips SDV1121 For UHF reception, For VHF reception, Set up a digital tuner with this antenna

Page 6

4Set up the SDV1121

For UHF reception

1 Turn the TV to the desired channel/ station.

2 Point the antenna stand towards the transmitter until the reception is achieved.

Tip

•• For best results, ensure that the UHF antenna faces towards the transmitter.

For VHF reception

1 Extend the telescopic dipoles to the longest possible length.

6EN

2 Turn the TV to the desired channel/ station. Move the dipoles in different directions up and down until the reception is achieved.

Note

•• To check the distance from the local TV broadcast transmitters to your location, visit www.antennaweb. org for more information.

Set up a digital tuner with this antenna

You can install available channels with the digital TV tuner.This automatic process is part of the setup of the tuner. Ensure the antenna has

set up properly before the tuner can receive viewable channels.

Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically .

Image 6
Contents Register your product and get support at SDV1121/27 Page Contents Safety RecyclingGet started InstallationYour SDV1121 OverviewSet up a digital tuner with this antenna For UHF receptionFor VHF reception Warranty and Service Frequently asked questionsGlossary CoaxialPage Koninklijke Philips Electronics N.V All rights reserved