For UHF reception

2 Turn the TV to the desired channel/ station. Move the VHF rod antenna in different directions up and down until the reception is achieved.

1 Turn the TV to the desired channel/ station.

2 Tilt or swivel the UHF loop antenna towards the transmitter until the reception is achieved.

English

Note

•• To check the distance from the local TV broadcast transmitters to your location, visit www.antennaweb. org for more information.

Set up a digital tuner with this antenna

You can install available channels with the digital TV tuner.This automatic process is part of the setup of the tuner. Ensure the antenna has

set up properly before the tuner can receive viewable channels.

There are two ways to connect the antenna to the TV:

•Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically .

•Connect the antenna directly to the TV.

Tune to the analogue channels and find the best antenna location. Then re-connect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner.

EN 7