Setting Up and Using E62i / E31i / E30i

ENGLISH

Setting Up and Using

the E62i / E31i / E30i

Setting up your E62i, E31i or E30i Graphic Equalizer is a simple procedure which takes only a few minutes:

1.Remove all packing materials (save them in case of need for future service) and decide where the unit is to be physically placed— it can be used free-standing or mounted in a standard 19" rack (the E62i requires two rack spaces, while the E31i and E30i require only a single rack space).

2.Make sure the power to all mixers and amplifiers in your audio system is off. On the

front panel of the E62i / E31i / E30i, place all ±12 dB, Cut Only and HPF switches to their out (off) position and set the Level slider(s) to their bottom-most “∞ ” setting.

3.Set all Equalizer sliders to their flat (“0”) center detented position.

4.The E62i / E31i / E30i can be used either as an “in-line” device, as an insert device (in conjunction with mixer insert points), or in an effects send-return loop. The illustrations on pages 12 - 13 show each of these typical configurations. Choose the configuration that is best for your application and then begin by making the E62i / E31i / E30i input connections, using either the XLR or 1/4" TRS connectors on the rear panel. WARNING: Both the XLR and 1/4" TRS inputs should not be connected simultaneously, or loading problems may result.

5.Next, make the E62i / E31i / E30i output connections, using the XLR or 1/4" TRS connectors on the rear panel. If required, connections can be made simultaneously to both.

6.Plug in the supplied AC connector and connect it to any standard AC socket. Because of the special relay power-on circuitry built into the E62i / E31i / E30i, you can even plug it into the same power strip that other audio devices (such as a mixing console) are connected to. You can then turn on all devices at once with the single power strip on-off switch, without generating speaker “thumps.”

7.Press the rear panel Power switch in order to turn on the E62i / E31i / E30i. The Bypass LED(s) will light either red or green, depending upon the setting of the front panel Bypass switch(es). Note that audio signal will be muted for approximately five seconds until the relay power-on circuitry is activated (at which time you’ll hear a click and the audio signal will be unmuted).

8.Apply an input signal to the E62i / E31i / E30i at or about 0 dBm (if sending signal from a mixer output bus, drive the mixer’s output meters at approximately 0 vu). While the input signal is present, slowly raise the front panel Level slider(s) to their center detented “0” points. For best signal-to-noise ratio, the Level slider(s) should be at or near the “0” point during normal operation. However, if the output signal is weak, use the appropriate Level slider(s) to slightly boost the volume (to a maximum of 6 dB). Conversely, if the signal causes the front panel Clip LED(s) to light, use the appropriate Level slider(s) to attenuate volume as necessary. In normal operation, the Clip LED(s) should not light at all; if they do, use the Level sliders to lower the volume of the output signal so that they do not light at all (clipping not only sounds awful, it can also damage speakers!).

E30I, E31I, E62I specifications

The Samson E62I, E31I, and E30I are part of a line of professional audio equipment known for their quality and versatility in various sound applications. Each model is tailored to meet different requirements without compromising on performance.

The Samson E62I is notable for its advanced design and exceptional sound quality. This model utilizes advanced driver technologies to deliver crisp highs and deep lows, making it ideal for both live performances and studio recordings. The E62I features a robust build, ensuring durability in demanding environments. Its lightweight construction allows for portability while maintaining structural integrity. The incorporation of advanced acoustic engineering means that sound professionals can rely on the E62I for an accurate reproduction of audio signals.

The Samson E31I is specifically designed for smaller venues or personal use, maintaining the high standards associated with the Samson brand. This model integrates a sleek, compact design that does not compromise audio quality. The E31I incorporates powerful monitoring capabilities, perfect for musicians who need to hear themselves clearly while performing. With built-in features like adjustable EQ controls and high-output performance, this model provides seamless integration into any audio setup. Additionally, its user-friendly interface makes it accessible for both beginners and seasoned professionals alike.

The Samson E30I complements the lineup by offering a budget-friendly option without sacrificing fundamental features. Despite its lower price point, the E30I includes the essential technologies that define the Samson reputation. It provides reliable performance for various applications, such as spoken word events and musical performances. The E30I is equipped with a simple yet effective design, featuring a clear sound output that captures the nuances of vocals and instruments alike. Its compact form factor ensures it can be easily transported and set up in any location.

In summary, the Samson E62I, E31I, and E30I represent a robust range of audio solutions catering to diverse needs. Each model integrates advanced technologies and user-friendly designs, ensuring high-quality sound and performance. Whether in a professional studio, at a live event, or for personal use, these models provide solutions that meet the expectations of audio professionals and enthusiasts alike. With Samson's commitment to innovation, each model stands as a testament to the brand's dedication to enhancing audio experiences.