Philips SRU 5020/86 manual Keys and functions

Instructions for use

5Then enter the code noted in step 2 using the digital keys.

– The TV key will now flash twice.

If the key flashes once for an extended period, the code has not been entered properly or the wrong code has been entered.

Start again from step 2.

6Point the SRU 5020 at the TV and check that it responds as it should.

– If the TV responds to all of the key commands, the SRU 5020 is ready for use. Do not forget to note your code.

•If the device does not respond at all, or not to all of the

key commands, start again from step 2 and try the next code from the list.

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions.

1	y Standby. . . . . . . . . switches TV or DVD on or off.
2	. . . - teletext on/off ( );

		- text mix (	);
		- text off (	);
		- wide screen TV ( );
		- enlarge (	);
		- text hold (	).
3	MENU	turns the menu on and off.
4	Cursor keys	cursor up, down, left, right in a menu.
5	A/V	switches between external inputs of your
		equipment.
6	s	mutes the sound of the TV.
7	- VOL +	adjusts the TV volume.
8	Digit keys	direct choice of channels and other functions.
9	SHIFT	for extra functions. When pressed at the same
		time as a second key, the second key will get
		another function. All blue labelled keys can be used
		together with SHIFT. For example:
	SHIFT + INSTALLinstalls your TV
	SHIFT + STORE . .	stores TV settings

Try out other combinations with the SHIFT-key on your device in order to find out which functions are available.

Only functions featured on the original remote control are available.

0 5	- red teletext key
	- rewind (DVD/VCR)
2	- index
	- play (DVD/VCR)
6	- blue teletext key
	- wind (DVD/VCR)
9	- green teletext key
	- stop (DVD/VCR)
0	record
;	- yellow teletext key
	- pause (DVD/VCR)

English

7