Philips DVR1EP16, DVR1EP08, DVR1EP32A Installing the DVR1, Mounting, Connecting the DVR1

SECTION 2: INSTALLING THE DVR1

PHILIPS

PHILIPS

PHILIPS

		CONSOLE
	SVHS IN	VCR	VCR	MON B MON A	1	2						9	10
KEYBD		IN	OUT				3	4	5	6	7	8
	SVHS OUT	SDA		ALARM

Multiplexer

ACCESSORIES

		1	5
ETHERNET	1 ALARM IN
	2 ALARM OUT
10/100	3 RECORD START IN	6	9
	4 ALARM RECORD RESET		12VDC
	5 VEXT PULSE OUT

6 ERROR OUT

7 GROUND

8 VIDEOLOSS OUT

9 DISK END OUT

DVR1

Keyboard Ethernet

	PHILIPS
11	12	13	14	15	16
	RS- 232		AUDIO IN	S-video IN	VIDEO IN
	SCSI
			AUDIO OUT S-video OUT VIDEO OUT
					SCSI
				Network

Audio

(Optional)

PHILIPS

Microphone

(Optional)

CD-writer

Figure 2A – Sample DVR1 System Installation

Figure 2A provides an illustration of a typical DVR1 system installation. Consider the peripheral devices necessary for your system application, and perform the system connections according to the following installation instructions.

2.1Mounting

The DVR1 is supplied as a desktop unit. If desired, your unit may be rack mounted using the rack mount kit (included with the unit). Ensure that the mounting/installation location provides adequate ventilation and protection from moisture. Do not obstruct the ventilation holes at the sides of the unit.

2.2Connecting the DVR1

Rear Panel Connections

1. Refer to Figure 2B for details on the input/output connections supplied by the DVR1.

ETHERNET

10/100

1

	1	5
1 ALARM IN
2 ALARM OUT
3 RECORD START IN	6	9

4 ALARM RECORD RESET

5 VEXT PULSE OUT

6 ERROR OUT

7 GROUND

8 VIDEOLOSS OUT

9 DISK END OUT

3	5	6	8	10
ACCESSORIES	RS-232	AUDIO IN	S-video IN	VIDEO IN
12V DC	SCSI
		AUDIO OUT	S-video OUT	VIDEO OUT
2	4	7	9	11

1.Ethernet Port: For viewing Live or Recorded Images on a PC via the Ethernet (network).

2.Power Connector: Connect 12 Volt AC external power supply (provided).

NOTE: Ensure that the site's AC Power is stable and within the rated voltage of the external power supply. If the site's AC power is likely to have spikes or power dips, use power line conditioning or an Uninterruptible Power Supply (UPS).

3.Accessory I/O Port: Used to connect peripheral devices such as alarm devices, alarm relays, or the VEXT (Video External Pulse) connection (see additional pertinent information, including pinout details, in this section).

4.SCSI Port: For connecting a SCSI compatible archive device.

5.RS-232 Serial Port: Serial port for Flash Upgrading of software. Also used for external control of unit.

NOTE: The RS-232 port does NOT work with a modem. Use a Null Modem type cable (Philips S1385 cable) to connect to this port.

6.Audio In (specified version only): Unbalanced, RCA style jack.

7.Audio Out (specified version only): Unbalanced, RCA style jack.

8.S-video In: Y/C video input with 4-pin mini-DIN style connector.

9.S-video Out: Y/C video output with 4-pin mini-DIN style connector.

10.Video In: Composite video input with BNC style connector.

11.Video Out: Composite video output with BNC style connector.

Figure 2B – DVR1 Rear Panel Connections

10