Philips DVR1EP32A, DVR1EP08, DVR1EP16 Playback, Message Disk FULL. Recording has Stopped

Disk Full Notification

This message will appear on the primary monitor to indicate that the unit has stopped recording because the disk is full.

In No Overwrite mode, the unit will not record over previously recorded data. To continue recording, the user must acknowledge the disk full message by pressing ENTER, then ERASE (or DELETE).

MESSAGE

DISK FULL. RECORDING HAS STOPPED.

[OK]

In Overwrite Once mode: The user must acknowledge the on-screen message by pressing ENTER.

The unit will resume recording when the user presses RECORD.

6.3Playback

1

2

12:34:45A PLAY

12/17/000.2p

3

4

1.Time the Data was Recorded

2.Date the Data was Recorded (If the letter A precedes the record rate, the unit is configured to record or play back audio).

3.Play Forward Mode Indicated

4.Normal Record Speed in Pictures per Second

Figure 6B - LCD during Playback

Play Forward

To begin normal playback in the forward direction, press Play Forward.

Playback is indicated via the following:

•PLAY appears briefly in the upper left-hand corner of the primary monitor.

•PLAY> appears on the LCD.

Reverse Play

To begin reverse playback, press Play Reverse. Reverse playback is indicated via the following:

•REVERSE PLAY appears briefly in the upper left-hand corner of the primary monitor.

•PLAY< appears on the LCD.

If there is only one recording session on the hard disk, the unit will indicate START OF DATA on the primary monitor.

Playback Speed

The unit plays back the data at the rate at which it was recorded. The user can alter the playback speed using Up/Down Record Speed.

Altering the playback speed overrides the speed of any incoming alarms. To clear the override, press STOP, then PLAY to resume playback at the speed that the data was recorded.

NOTE: For clear audio, playback should be at the same speed at which it was recorded.

Fast Forward

During playback, pressing Fast Forward allows viewing of data at a faster than normal rate.

Fast Forward is indicated via the following:

•FAST FORWARD appears briefly in the upper left-hand corner of the primary monitor.

•FFWD appears on the LCD.

PLAY FWD

Play Forward

Button

PLAY REV

Play Reverse

Button

REC SPD

Record Speed

Buttons

Fast Forward

Button

25