•Write Once: When the archive device is full, archiving stops. Archiving will resume after the user acknowledges that the archive device is full and that archiving should resume.
•No Overwrite: When the archive device is full, archiving stops. Archiving will resume only after a user enters the advanced menu, manually erases the media, and resumes archiving.
•Continuous: When the archive device is full, archiving will continue, writing over the oldest video first.
Main Menu ➝ Archive Setup ➝ Erase Archive Medium
The Erase Archive Medium feature is used to erase the archive media.
ERASING MEDIA . . .
[CANCEL]
NOTE: Before starting the erasing process, the DVR1 must be set to Selective Archive, and Background Archive must be set to OFF.
To erase the archived data, press ENTER. The Erasing Media progress bar appears. Press ENTER to cancel.
When the unit is finished erasing the pointers to the data, the message box at right appears. Press ENTER to acknowledge the message.
4.8Accessing the Advanced Menu
For information on accessing the Advanced Programming menu, please refer to Section 5 in this manual. Note that the Advanced Menu is password protected.
4.9About DSR
Main Menu ➝ About DSR
This screen allows the user to view important device information at a single glance.
MESSAGE
ARCHIVE MEDIUM ERASED
[OK]
|
|
|
|
|
|
|
| SERIAL NUMBER: |
|
| |||
| SOFTWARE VERSION: | 2.00 |
|
|
| |
| SOFTWARE DATE: | SEP 17 2002 15:20:06 |
|
| ||
| SOFTWARE CHECKSUM: | 1BB200CE |
|
| ||
| BOOT CODE VER. : | 1.01 |
|
|
| |
| DISK SIZE: | 327.86 GB |
|
| ||
| ETHERNET ENABLE: | DISABLED |
|
| ||
| ETHERNET ADDRESS: | 3.18.173.10 |
|
|
| |
| HARDWARE ADDRESS: |
|
| |||
|
|
|
|
|
| |
|
|
| [OK] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
19