System Menu - Setup (cont’d)
{Progressive }
Allow you to turn on the progressive scan function if the DVD recorder is connected to a TV with progressive scan.
–{ On } : Select this to enable progressive scan function.
–{ Off } : Select this to disable the progressive scan function.
{96 kHz }
–{ 96 kHz } : Select this if the optional audio device is capable of processing digital signal input with sampling rates of 96 kHz.
–{ 48 kHz } : Select this if the optional audio device is incapable of processing 96 kHz digital signal input. The signal will then be converted to a standard signal with sampling rates of 48 kHz.
English
Audio output
After connecting the DVD recorder to your TV and other devices, you may need to change the digital output setting. Adjust the Digital Output only if you use the DVD recorder’s COAXIAL jack.
STOP | |
Audio output |
|
| |
Digital output |
|
96 kHz |
|
{Digital output }
–{ All } : Select this if you use the COAXIAL socket to connect the DVD recorder to a stereo receiver that has a
–{ PCM } : Select this if the connected audio equipment is not capable of decoding multichannel audio. Dolby Digital and
–{ Off } : Select this to deactivate the digital audio output. For example, if you use the AUDIO OUT sockets to connect the DVD recorder to a TV or Stereo system.
Language
For more information on this menu, please see page 29 “Setting the language.”
TIPS: Underlined option is the factory default setting.
Press 1 to go back to previous menu item. Press
61
DVDR610_615_37_Engfinal434 | 61 | 8/16/04, 4:34 PM | 3139 246 14221 |
|