Installing the DVD Recorder (cont’d)
Setting up VCR Plus+® channels
You need to program the DVD recorder with your local channel information before you can use VCR Plus+® programming system.
1Press SYSTEM-MENU.
➜ The system menu appears on the TV.
2Press 4 repeatedly to select { Set-up .}
3Press 2 repeatedly to select { Analog Ch.}
4Press 4 repeatedly to select { VCR Plus+ Ch. } and press 2 to confirm.
5Press 3 4 to select a VCR Plus+® channel number and press 2 to confirm.
| 001 . . . | ➠ 002 1 . . |
VCR Plus+ Ch. | 002 . . . | |
| 003 . . . |
|
| 004 . . . |
|
| 005 . . . |
|
006 . . .
007 . . .
6Press 3 4 to select the VCR Plus+® TV channel or use the alphanumeric keypad
➜ Refer to the list from your local newspaper or TV guide for the
VCR Plus+® channel numbers for your area. These are the numbers you will enter as the channel number as you complete the selection.
7Repeat steps 5~6 to search for other TV channels.
Selecting the channel input signal
The DVD recorder will detect whether you connected an Antenna or Cable TV signal. If you are not receiving the correct channels, you can use this function to select the type of connection you are using and allow the DVD recorder to reset the channels.
1Press SYSTEM-MENU.
➜ The system menu appears on the TV.
2Press 4 repeatedly to select { Set-up .}
3Press 2 repeatedly to select { Analog Ch.}
4Press 4 repeatedly to select
{Connection } and press 2 to confirm.
5Press 3 4 to select the connection the TV is using.
➜{ Auto } : Select this to enable the
DVD recorder to detect the input signal automatically.
➜{ Cable } : Select this if you connected a cable signal.
➜{ Antenna } : Select this if you connected an antenna signal.
6Press OK to confirm.
➜ The TV channel search starts.
E n g l i s h
TIPS: Press 1 to go back to previous menu item. Press
27
DVDR610_615_37_Engfinal434 | 27 | 8/16/04, 4:05 PM | 3139 246 14221 |
|