Philips 64PH9901 Cable Tuning, Select Cable Channel, CABLE- If you do have, Cable TV connected

	NTSC ANALOG FEATURE MENU CONTROLS
	CABLE TUNING
	ou need to make sure the
	YDPTV is set to pick up either
	Cable TV or Antenna signals. In
	other words, the DPTV needs to
	know if you connected a Cable TV
	signal or a normal antenna to its		NTSC
	ANTENNA plug.		ANALOG MAIN MENU
	NOTE: If you went through First		PICTURE		SOUND
	Time Setup (see page 6), this task
	has already been completed for		FEATURES
	you.		1ST TIME SETUP		EXIT
	BEGIN					FEATURE MENU
1	Select CABLE CHANNEL					SMART	CABLE
						PICTURE	TUNING
	TUNING control.
						CLOSED
							CHANNEL
	With the FEATURES MENU on-					CAPTIONS	MEMORY
						EXIT	MORE...
	screen, move the RED highlight
							1 OF 2
	with the MENU (M)	buttons.
	Then press the MENU button.		2
2	Press the MENU ▲▼ buttons
			1		mute
	to move the RED highlight. Press			TV	2	CABLE TUNING
	the MENU button to select (✔) the
			menu		volume
	desired mode - For Example:
					+	CABLE
	CABLE.			M		NORMAL
	CABLE- If you DO have		exit
			4/4 Analog	DTV	1	EXIT
	Cable TV connected
	to the DPTV.		3
	Channels 1-125
	available.
	NORMAL- If you have an
	Antenna connected
	to the DPTV.
	Channels 2-69
	available.
3 Press the “exit” button to clear
	the screen.
	STOP
				13