Philips 64PH9901 Channel Memory AUTO-PROGRAMMING, Select Channel Memory, Press the exit or Menu

		NTSC ANALOG FEATURE MENU CONTROLS
	CHANNEL MEMORY
	AUTO-PROGRAMMING
	our DPTV can automatically set
	Yitself for local area (or Cable TV)
	channels. This makes it easy for you
	to select only the TV stations in your			NTSC
	area when the CHANNEL ▲▼
	buttons are pressed.			ANALOG MAIN MENU
	NOTE: If you went through First			PICTURE		SOUND
	Time Setup (see page 6), this task has			FEATURES			FEATURE MENU
	already been completed for you.						SMART			CABLE
				1ST TIME SETUP		EXIT
	BEGIN						PICTURE			TUNING
1	Select CHANNEL MEMORY						CLOSED			CHANNEL
							CAPTIONS			MEMORY
	(START AUTO-PROGRAMMING)
	control.						EXIT			MORE...
										1 OF 2
	With the FEATURES MENU on-
	screen, move the RED highlight with
	the MENU (M)	buttons. Then
	press the MENU button.		2				CHANNEL MEMORY
			1			mute
2	Press the MENU ▲▼ buttons to					2	ADD/DELETE
					TV		CHANNELS
	select the START AUTO-
				menu			START
	PROGRAMMING option, then press					volume
						+	AUTO-PROGRAMMING
	the Menu button to begin.			M
	The TV shows which channel						EXIT
				exit
	numbers are "SAVED" (✔) as they			4/4 Analog	DTV	1
	are added into memory.			3
	"Auto-programming CHANNEL
							AUTO-PROGRAMMING
	MEMORY is finished" shows when
							CHANNEL MEMORY
	the DPTV is through adding channels.						1	2	3	4
							5	6	7	8
3 Press the “exit” (or Menu)							9	1O	11	12
						✔ Channel Numbers are	13	14	15	16
	button to clear the screen.						17	18	19	20
						Saved in Memory
		STOP					21	22	23	24
								Press "M" to
							Stop Auto-Program
	SMART HELP
	Try it out. Press the
	CHANNEL▲▼ buttons
	and see which channels you can
	select.
	Remember, an Antenna or Cable
	signal must first be connected to
	your DPTV so that channels can
	be saved.
	If you want to delete any
	unwanted channels from the
	DPTV's memory, see
	"ADD/DELETE CHANNELS" on
	the next page.
					14