3 Change settings
This section helps you change the settings of this player.
Note
•• If you change a setting, make sure that the TV supports the new setting.
1
2
3
D SC M NU
Watch 3D video |
Sound
1 Press 
.
2 Select [Setup] > [Audio] to access the audio setup options.
• [Night mode]: Select quiet or full |
dynamic sound. Night mode decreases |
the volume of loud sound and |
increases the volume of soft sound |
(such as speech). |
• [HDMI Audio]: Set an HDMI audio |
format when this player is connected |
Note
•• You cannot change a menu option that is grayed out.
•• To return to the previous menu, press 
.To exit the menu, press 
.
Picture
1 Press 
.
2 Select [Setup] > [Video] to access the video setup options.
•[TV display]: Select a picture display format to fit the TV screen.
•[HDMI video]: Select an HDMI video resolution.
•[HDMI Deep Color]: Display colors with more shades and hues when the video content is recorded in Deep Color and the TV supports this feature.
•[Picture settings]: Select a predefined color setting.
•[Watch 3D video]: Set to 3D or 2D output when playing a
through HDMI. |
• [Digital Audio]: Select an audio format |
for the sound output when this |
player is connected through a digital |
connector (coaxial). |
• [PCM Downsampling]: Set the |
sampling rate for PCM audio output |
when this player is connected through |
a digital connector (coaxial). |
Note
•• Night mode is only available for Dolby encoded DVD and
Network (installation, status...)
1 Press 
.
2 Select [Setup] > [Network] to access the network setup options.
•[Network installation]: Start a wired or wireless installation to make the network work.
EN 13