Philips TP2781, TP3281, TP3681 Connect the S-VIDEO, Turn the VCR or Digital Video Disc Player on

Page 23

HOW TO USE THE AUDIO/VIDEO INPUT JACKS

S-VIDEO INPUT

The S(uper)-Video connection on the rear of the television can give you better picture detail and clarity, for the playback of S- VHS VCR tapes, or Digital Video Discs than the normal antenna picture connections.

Note: The VCR (or Digital Video Disc player) must have a S- VIDEO OUT(put) jack in order for you to complete the connec- tions shown on this page.

BEGIN

Connect the S-VIDEO

CABLE to the S-VIDEO input jack on the rear of the television, then the AUDIO (red and white) to the AUDIO IN (IN 2) jacks on the rear of the TV.

Connect the S-VIDEO

CABLE to the S-VIDEO output jack on the accessory device. Then connect the red and white AUDIO CABLES to the AUDIO (left and right) output jacks on the rear of the accessory device.

NOTE: Repeatedly pressing the AV button on the remote will toggle the picture source from the current chan- nel (Tuner A or B), to the SVID-R connection, to the AV 1 connection, to the AV 2 connection.

This also applies to the Multi Media button on the remote. Repeatedly pressing the Multi Media button will toggle the picture source from the current channel (Tuner A or B), to the MM 1 (SVID-R) connection, to the MM 2 (AV 1) connection, to the

MM3 (AV 2) connection.

24

AV 1

AV 2

SVID-R

		BACK OF TV
				1
	S-VIDEO CABLE	S-VIDEO
	S-VIDEO CABLE
	(NOT SUPPLIED)	VIDEO
		L
	ANT "A"	AUDIO
	75	R/MONO
			IN-2	OUT
			AUDIO IN
			(RED/WHITE)
	VIDEO IN			2
	(YELLOW)			2
	ANT/CABLE	S-VIDEO	R	L
	ANT/CABLE	OUT	AUDIO OUT
	OUT	OUT	AUDIO OUT
	OUT
			BACK OF ACCESSORY

Turn the VCR (or Digital Video Disc Player) ON.

4

SLEEP

POWER

3

Press the AV button on the remote to tune to the SVID-R channel. You are now ready to view the tape or disc on the TV.

SMART HELP

The S-VIDEO and VIDEO IN-2 Inputs are in

parallel. The S-VIDEO input is dominate when in use. If seperate video signals are connected to the S-Video and the VIDEO IN-2 Inputs, the signal from the VIDEO IN-2 input will be unuseable.

If you have added SVID-R to the TV’s channels memory, just press the CHANNEL + or – buttons to select the S-VIDEO mode.

TV	AV	ON/OFF	POSITION	FREEZE
VCR	SWAP	SOURCE	PIP CH
			UP	DN
ACC
	SMART			SMART
	SOUND			PICTURE
	MENU			SURF
	VOL			CH
		MUTE
	CC	STATUS	CLOCK	A/CH
		EXIT	TV/VCR
	VCR			MULTI
	RECORD	INCREDIBLE		MEDIA
		INCREDIBLE

DSS, DVD, Video Game, etc.

(EQUIPPED WITH S-VIDEO AND

AUDIO OUTPUT JACKS)

IF YOU ARE USING A

MONO DEVICE, USE

ONLY THE AUDIO

R/MONO JACK.

Image 23

Contents DFU Warranty Verification Safety Instructions Read before operating equipment Table of Contents Text FeaturesUse the Cursor Left HOW to Adjust the TV PictureButtons to adjust the selected control To enter the correct time. Use Setting the TV’S ClockButton again to highlight the time indicator area Press the Numbered buttonsPress the Menu button on Activating the TV’S on Timer ControlButton again to highlight the channel indicator area Selecting the TV’S on Timer ChannelUse the Cursor UP or CUR Setting the TV’S on Timer Start TimeTo enter the desired start up time Setting the TV’S on Timer Display Using the Smart Lock Setup Code Control Remote control Enter your four digit access code Using the Smart Lock Block Channel ControlSetup Code display as you press Press the Cursor UP or Cursor Down buttons to Turning on the Noise Reduction Picture ControlPress the Cursor Down Button again to highlight the Contrast + option area Turn the Contrast + feature on or OFFTurning on the Contrast + Control To highlight the Contrast + ControlUsing the Closed Caption Control An on-screen count down will Using the Sleep Timer ControlMenu Using TREBLE, BASS, and Balance Sound ControlsPress the Cursor Down button to select the Sound Button to select the Sound menu HOW to SET the TV for Stereo ProgramsThis TV will set the Stereo feature automatically Press the Volume + or but Using the Incredible Stereo FeatureUsing the TV Volume BAR Control Press the Volume + orPress the Cursor Down button to select the Speaker Using the TV Speaker Control and Audio Output JacksUse the A/V button on HOW to USE the AUDIO/VIDEO Input JacksConnect the Video yellow Turn the VCR and the TVTurn the VCR or Digital Video Disc Player on Connect the S-VIDEOPress the Smart Picture button repeatedly to select either Using the Smart Picture ControlPress the Smart Picture Ture on or OFF Using the Smart Sound ControlPress the Smart Sound but Press the Smart Picture button repeatedly to turn the feaPress the Cursor Left Using the TV’S Channel Surf ControlPress the Channel + or Press the Surf button onIs necessary Setting the Remote Control to Work with Other DevicesEnter the THREE-DIGIT Place the TV/VCR/ACCPress the VCR Record Press the Smart SoundDevice your are attempting to program to turn it on Press the Power button onMode Switch in the proper posi Tion Remote Vcrcode no Remote Control Direct Entry CodesRemote Dvdcode no Using the REMOTE’S VCR Buttons VCR to TV PIP connections have been completed Using the PIP PICTURE-IN-PICTURE FeatureConnect the Video OUT Move to the next page afterAV 1, AV 2, SVID-R for picture Turn the TV and VCR orPress the PIP ON/OFF but Press the PIP Source butPress the PIP Position Press the PIP ON/OFF butPress the PIP ON/OFF button Pressing the ON/OFF button aAdjusting the PIP Color and Tint On the VCR to the Video in jack on the TV First use an optional signalMore PIP PICTURE-IN-PICTURE Connections Connect the yellow Video Cable First connect the original cableConnect the ANT OUT jack on Rear of the VCR to the ANT a input on the rear of the TVTips if Something Isnt Working Glossary to Television Terms Index Philips Consumer Electronics Company Georgia North Carolina Illinois Limited Warranty