Philips TP2781, TP3281, TP3681 Press the Power button on, Mode Switch in the proper posi Tion

Page 29

SETTING THE REMOTE CONTROL TO WORK WITH OTHER DEVICES

Search Method

Your TV remote can be set to work various external devices

such as VCRs, Cable Boxes, Satellite Receivers, Dss, DVD, etc. by what is called the search method of remote control pro- gramming.

If the “Remote Code” number method shown on page did not set your remote to work your external device, then follow the easy steps listed below.

Please read steps 1-4 before beginning.

BEGIN

Press the POWER button on

the device your are attempting to program to turn it ON.

Place the TV/VCR/ACC

Mode Switch in the proper posi-

tion.

Press the VCR RECORD and the SMART SOUND buttons simultaneously and hold them

down.

The device will begin to change channels after the remote identi- fies the correct code. When the channels start to change release the VCR RECORD and SMART SOUND buttons. The remote should be ready to operate the device.

SMART HELP

This method can take up to two minutes to preform.

Don’t let the device scan up more than five channels. If you do the remote may pass up the right code and another two minute search cycle will have to be repeated.

If no channel change happens within two minutes, repeat steps 1-4. Should a channel change still not occur, the remote will not work the desired device.

Satellite Receiver,

DSS, DVD,

or similar device

Cable Converter		070809 06			07
1					07
1					0809
			06	0708	0809
VCR				09
				09
2	SLEEP			POWER	4
2	AV	ON/OFF	POSITION FREEZE
TV	AV	ON/OFF	POSITION FREEZE
VCR	SWAP	SOURCE		PIP CH
			UP	DN
ACC
	SMART			SMART
	SOUND			PICTURE
	MENU			SURF
3
	VOL			CH
		MUTE

CC STATUS CLOCK A/CH

EXIT TV/VCR

VCR

MULTI

RECORDMEDIA

INCREDIBLE

3

Image 29

Contents DFU Warranty Verification Safety Instructions Read before operating equipment Table of Contents Text FeaturesUse the Cursor Left HOW to Adjust the TV PictureButtons to adjust the selected control Button again to highlight the time indicator area Setting the TV’S ClockPress the Numbered buttons To enter the correct time. UsePress the Menu button on Activating the TV’S on Timer ControlButton again to highlight the channel indicator area Selecting the TV’S on Timer ChannelUse the Cursor UP or CUR Setting the TV’S on Timer Start TimeTo enter the desired start up time Setting the TV’S on Timer Display Using the Smart Lock Setup Code Control Remote control Enter your four digit access code Using the Smart Lock Block Channel ControlSetup Code display as you press Press the Cursor UP or Cursor Down buttons to Turning on the Noise Reduction Picture ControlPress the Cursor Down Turning on the Contrast + Control Turn the Contrast + feature on or OFFTo highlight the Contrast + Control Button again to highlight the Contrast + option areaUsing the Closed Caption Control An on-screen count down will Using the Sleep Timer ControlMenu Using TREBLE, BASS, and Balance Sound ControlsPress the Cursor Down button to select the Sound Button to select the Sound menu HOW to SET the TV for Stereo ProgramsThis TV will set the Stereo feature automatically Using the TV Volume BAR Control Using the Incredible Stereo FeaturePress the Volume + or Press the Volume + or butPress the Cursor Down button to select the Speaker Using the TV Speaker Control and Audio Output JacksConnect the Video yellow HOW to USE the AUDIO/VIDEO Input JacksTurn the VCR and the TV Use the A/V button onTurn the VCR or Digital Video Disc Player on Connect the S-VIDEOPress the Smart Picture button repeatedly to select either Using the Smart Picture ControlPress the Smart Picture Press the Smart Sound but Using the Smart Sound ControlPress the Smart Picture button repeatedly to turn the fea Ture on or OFFPress the Channel + or Using the TV’S Channel Surf ControlPress the Surf button on Press the Cursor LeftIs necessary Setting the Remote Control to Work with Other DevicesPress the VCR Record Place the TV/VCR/ACCPress the Smart Sound Enter the THREE-DIGITDevice your are attempting to program to turn it on Press the Power button onMode Switch in the proper posi Tion Remote Vcrcode no Remote Control Direct Entry CodesRemote Dvdcode no Using the REMOTE’S VCR Buttons Connect the Video OUT Using the PIP PICTURE-IN-PICTURE FeatureMove to the next page after VCR to TV PIP connections have been completedPress the PIP ON/OFF but Turn the TV and VCR orPress the PIP Source but AV 1, AV 2, SVID-R for picturePress the PIP ON/OFF button Press the PIP ON/OFF butPressing the ON/OFF button a Press the PIP PositionAdjusting the PIP Color and Tint On the VCR to the Video in jack on the TV First use an optional signalMore PIP PICTURE-IN-PICTURE Connections Connect the ANT OUT jack on First connect the original cableRear of the VCR to the ANT a input on the rear of the TV Connect the yellow Video CableTips if Something Isnt Working Glossary to Television Terms Index Philips Consumer Electronics Company Georgia North Carolina Illinois Limited Warranty