Philips TP2781, TP3281, TP3681 HOW to USE the AUDIO/VIDEO Input Jacks, Connect the Video yellow

Page 22

HOW TO USE THE AUDIO/VIDEO INPUT JACKS

AUDIO/VIDEO INPUTS

The TV’s Audio/Video Input jacks are for direct picture and sound connections between the TV and a VCR (or similar device) that has Audio/Video Output jacks.

BEGIN

Connect the VIDEO (yellow)

CABLE to the VIDEO IN jack on the back of the TV. Then con- nect the AUDIO (red and white) CABLES to the AUDIO (left and right) IN jacks on the rear of the TV.

Connect the VIDEO (yellow)

CABLE to the VIDEO OUT jack on the back of the VCR. Then connect the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR.

Turn the VCR and the TV

NOTE: Repeatedly pressing the AV button on the remote will toggle the picture source from the current chan- nel (Tuner A or B), to the SVID-R connection, to the AV 1 connection, to the AV 2 connection.

This also applies to the Multi Media button on the remote. Repeatedly pressing the Multi Media button will toggle the picture source from the current channel (Tuner A or B), to the MM 1 (SVID-R) connection, to the MM 2 (AV 1) connection, to the MM 3 (AV 2) connection.

24

AV 1

AV 2

SVID-R

BACK OF TV

1

S-VIDEO

VIDEO

L

ANT "A"AUDIO

75R/MONO

IN-2 IN-1

VIDEO IN (YELLOW)

AUDIO IN	2
(RED/WHITE)	2
OUT	OUT ANTENNA

ON.

Use the A/V button on the

4

SLEEP

POWER

IN

BACK OF VCR

R AUDIO L	VIDEO ANTENNA
	OUT
IN	IN

remote to select the AV 1 chan- nel.

With the VCR ON and a prere- corded tape inserted, press the PLAY button to view the tape on the television.

SMART HELP

Remember, with the TV/VCR/ACC switch in the

VCR position, pressing the (CLOCK) TV/VCR button will allow you to toggle between the VCR mode and the TV mode.

TV	AV	ON/OFF	POSITION	FREEZE
VCR	SWAP	SOURCE	PIP CH
			UP	DN

ACC

SMARTSMART

SOUNDPICTURE

MENUSURF

VOL			CH
	MUTE
CC	STATUS	CLOCK	A/CH
	EXIT	TV/VCR
VCR			MULTI
RECORD	INCREDIBLE		MEDIA
	INCREDIBLE

3

VCR

(EQUIPPED WITH VIDEO AND

AUDIO OUTPUT JACKS)

IF YOU ARE USING A

MONO DEVICE, USE

ONLY THE AUDIO

R/MONO JACK.

Image 22

Contents

DFU Warranty Verification Safety Instructions Read before operating equipment Table of Contents Features TextButtons to adjust the selected control HOW to Adjust the TV PictureUse the Cursor Left Press the Numbered buttons Setting the TV’S ClockButton again to highlight the time indicator area To enter the correct time. UseActivating the TV’S on Timer Control Press the Menu button onSelecting the TV’S on Timer Channel Button again to highlight the channel indicator areaTo enter the desired start up time Setting the TV’S on Timer Start TimeUse the Cursor UP or CUR Setting the TV’S on Timer Display Using the Smart Lock Setup Code Control Setup Code display as you press Using the Smart Lock Block Channel ControlRemote control Enter your four digit access code Press the Cursor Down Turning on the Noise Reduction Picture ControlPress the Cursor UP or Cursor Down buttons to To highlight the Contrast + Control Turn the Contrast + feature on or OFFTurning on the Contrast + Control Button again to highlight the Contrast + option areaUsing the Closed Caption Control Using the Sleep Timer Control An on-screen count down willPress the Cursor Down button to select the Sound Using TREBLE, BASS, and Balance Sound ControlsMenu This TV will set the Stereo feature automatically HOW to SET the TV for Stereo ProgramsButton to select the Sound menu Press the Volume + or Using the Incredible Stereo FeatureUsing the TV Volume BAR Control Press the Volume + or butUsing the TV Speaker Control and Audio Output Jacks Press the Cursor Down button to select the SpeakerTurn the VCR and the TV HOW to USE the AUDIO/VIDEO Input JacksConnect the Video yellow Use the A/V button onConnect the S-VIDEO Turn the VCR or Digital Video Disc Player onPress the Smart Picture Using the Smart Picture ControlPress the Smart Picture button repeatedly to select either Press the Smart Picture button repeatedly to turn the fea Using the Smart Sound ControlPress the Smart Sound but Ture on or OFFPress the Surf button on Using the TV’S Channel Surf ControlPress the Channel + or Press the Cursor LeftSetting the Remote Control to Work with Other Devices Is necessaryPress the Smart Sound Place the TV/VCR/ACCPress the VCR Record Enter the THREE-DIGITMode Switch in the proper posi Tion Press the Power button onDevice your are attempting to program to turn it on Remote Control Direct Entry Codes Remote Vcrcode noRemote Dvdcode no Using the REMOTE’S VCR Buttons Move to the next page after Using the PIP PICTURE-IN-PICTURE FeatureConnect the Video OUT VCR to TV PIP connections have been completedPress the PIP Source but Turn the TV and VCR orPress the PIP ON/OFF but AV 1, AV 2, SVID-R for picturePressing the ON/OFF button a Press the PIP ON/OFF butPress the PIP ON/OFF button Press the PIP PositionAdjusting the PIP Color and Tint More PIP PICTURE-IN-PICTURE Connections First use an optional signalOn the VCR to the Video in jack on the TV Rear of the VCR to the ANT a input on the rear of the TV First connect the original cableConnect the ANT OUT jack on Connect the yellow Video CableTips if Something Isnt Working Glossary to Television Terms Index Philips Consumer Electronics Company Georgia North Carolina Illinois Limited Warranty