Philips TP2781, TP3281, TP3681 First connect the original cable, Connect the ANT OUT jack on

Page 38

MORE PIP (PICTURE-IN-PICTURE) CONNECTIONS

PIP hookup with a VCR and a Digital Video Disc Player (or

similar device).

BEGIN

First connect the original cable

TV signal or Antenna signal to the ANT IN jack on the back of the VCR.

Connect the ANT OUT jack on

REAR OF TV

the rear of the VCR to the ANT “A” input on the rear of the TV.

Connect the yellow Video Cable

from the VIDEO OUT jack on the VCR to the VIDEO IN jack on the TV (labeled VIDEO IN-2). Then, connect the red and white Audio Cables from the AUDIO OUT jacks on the VCR to the AUDIO IN jacks on the rear of the TV (labeled

2

ANT "A" 75

3

S-VIDEO

VIDEO

L

R/MONO

IN-2 IN-1

4

TO AVOID DAMAGE

1.DO NOT CONNECT SURROUND SOUND SPEAKERS TO A SEPARATE AMPLIFIER OR TO SPEAKERS CONNECTED TO ANOTHER PRODUCT.

2.DO NOT CONNECT LEFT AND RIGHT SPEAKER OUTPUT TOGETHER.

AUDIO L & R/MONO IN-2).

75OHM

COAXIAL

CABLE

AUDIO CABLES	VIDEO
(RED AND WHITE)	CABLE

Connect the yellow Video Cable

from the VIDEO OUT jack on the Digital Video Disc Player to the VIDEO IN jack on the TV (labeled VIDEO IN-1). Then, connect the red

VIDEO

CABLE

(YELLOW)

(YELLOW)

AUDIO CABLES

(RED AND WHITE)

and white Audio Cables from the AUDIO OUT jacks on the Digital Video Disc Player to the AUDIO IN jacks on the rear of the TV (labeled AUDIO L & R/MONO IN-2).

Note: When selecting the PIP SOURCE, the Digital Video Disc Player will appear on the AV 1 channel, and the VCR will appear on the AV 2 channel.

	OUT	OUT
	ANTENNA					1
	OUT					1
	OUT
	VIDEO	R AUDIO	L	AC-3(ANALOG OFF)	PCM/		VIDEO
				PCM(ANALOG ON)	PCM/			S
					AC-3 DIGITAL
					AC-3 DIGITAL
	ANTENNA			AUDIO SELECTION		2	VIDEO OUT
75 OHM	IN					R	L
						R	L
	IN	IN			AUDIO OUT		ANALOG
COAXIAL					AUDIO OUT
COAXIAL
CABLE

VCR	DVD (OR SIMILAR)

1

OR

OUTSIDE UHF/VHF

ANTENNA OR

CABLE TV SIGNAL

Image 38

Contents

DFU Warranty Verification Safety Instructions Read before operating equipment Table of Contents Features TextUse the Cursor Left HOW to Adjust the TV PictureButtons to adjust the selected control Press the Numbered buttons Setting the TV’S ClockButton again to highlight the time indicator area To enter the correct time. UseActivating the TV’S on Timer Control Press the Menu button onSelecting the TV’S on Timer Channel Button again to highlight the channel indicator areaUse the Cursor UP or CUR Setting the TV’S on Timer Start TimeTo enter the desired start up time Setting the TV’S on Timer Display Using the Smart Lock Setup Code Control Remote control Enter your four digit access code Using the Smart Lock Block Channel ControlSetup Code display as you press Press the Cursor UP or Cursor Down buttons to Turning on the Noise Reduction Picture ControlPress the Cursor Down To highlight the Contrast + Control Turn the Contrast + feature on or OFFTurning on the Contrast + Control Button again to highlight the Contrast + option areaUsing the Closed Caption Control Using the Sleep Timer Control An on-screen count down willMenu Using TREBLE, BASS, and Balance Sound ControlsPress the Cursor Down button to select the Sound Button to select the Sound menu HOW to SET the TV for Stereo ProgramsThis TV will set the Stereo feature automatically Press the Volume + or Using the Incredible Stereo FeatureUsing the TV Volume BAR Control Press the Volume + or butUsing the TV Speaker Control and Audio Output Jacks Press the Cursor Down button to select the SpeakerTurn the VCR and the TV HOW to USE the AUDIO/VIDEO Input JacksConnect the Video yellow Use the A/V button onConnect the S-VIDEO Turn the VCR or Digital Video Disc Player onPress the Smart Picture button repeatedly to select either Using the Smart Picture ControlPress the Smart Picture Press the Smart Picture button repeatedly to turn the fea Using the Smart Sound ControlPress the Smart Sound but Ture on or OFFPress the Surf button on Using the TV’S Channel Surf ControlPress the Channel + or Press the Cursor LeftSetting the Remote Control to Work with Other Devices Is necessaryPress the Smart Sound Place the TV/VCR/ACCPress the VCR Record Enter the THREE-DIGITDevice your are attempting to program to turn it on Press the Power button onMode Switch in the proper posi Tion Remote Control Direct Entry Codes Remote Vcrcode noRemote Dvdcode no Using the REMOTE’S VCR Buttons Move to the next page after Using the PIP PICTURE-IN-PICTURE FeatureConnect the Video OUT VCR to TV PIP connections have been completedPress the PIP Source but Turn the TV and VCR orPress the PIP ON/OFF but AV 1, AV 2, SVID-R for picturePressing the ON/OFF button a Press the PIP ON/OFF butPress the PIP ON/OFF button Press the PIP PositionAdjusting the PIP Color and Tint On the VCR to the Video in jack on the TV First use an optional signalMore PIP PICTURE-IN-PICTURE Connections Rear of the VCR to the ANT a input on the rear of the TV First connect the original cableConnect the ANT OUT jack on Connect the yellow Video CableTips if Something Isnt Working Glossary to Television Terms Index Philips Consumer Electronics Company Georgia North Carolina Illinois Limited Warranty