Philips TP2781, TP3281, TP3681 Using the PIP PICTURE-IN-PICTURE Feature, Connect the Video OUT

Page 33

USING THE PIP (PICTURE-IN-PICTURE) FEATURE

Hooking up PIP

Picture in Picture (PIP) is the showing of two pictures on

the screen at the same time. (One main screen picture and a small- er inset picture, or PIP).

Note: the PIP picture must be supplied by a VCR (or other accessory device equipped with a VIDEO OUTPUT jack).

The following is a basic PIP hookup using a VCR to supply the secondary picture.

BEGIN

Connect the VIDEO OUT

jack on the VCR to the VIDEO IN (yellow) jack on the rear of the TV.

Also connect the AUDIO OUT

(Right and Left) jacks from the VCR to the AUDIO IN jacks (red and white) on the TV.

Also be sure that there is a nor- mal Cable or Antenna signal hook from the VCR to the TV.

This completes the a basic PIP hookup. Refer to pages 37-38 for “More PIP Connections”.

Move to the next page after

the VCR to TV PIP connections have been completed.

SMART HELP

Remember, for other pos- sible connections see pages

37-38 for the “More PIP Connection” section.

If you have a single (Monaural) Audio Output VCR, there are two methods of connection. Use only the Right Audio IN (RED) and leave the Left Audio IN with NO connection. Or, “Y” connectors are available to complete your connec- tion. Contact your dealer, or our Parts Information Center,

1-800-851-8885, for details.

MAIN SCREEN PICTURE

PIP INSET PICTURE

 

 

 

 

 

 

BACK OF TV

 

 

 

 

 

 

1

 

 

S-VIDEO

 

 

 

 

 

VIDEO

 

 

 

 

 

L

 

 

 

 

ANT "A"

AUDIO

 

 

 

 

75

R/MONO

 

 

 

 

 

IN-2

IN-1

OUT

 

 

 

 

 

 

AUDIO OUT

 

ANT OUT

VIDEO

 

FROM VCR

 

 

TO AUDIO IN

 

 

 

OUT

 

 

 

 

 

ON TV

 

 

(YELLOW)

 

 

(RED AND WHITE)

OUTDOOR

 

 

 

 

 

 

 

UHF/VHF

OUT

OUT

OUT

 

 

 

 

 

ANTENNA

 

 

 

 

 

 

ANTENNA

VIDEO

R AUDIO L

 

 

 

OR

 

 

 

 

 

IN

IN

IN

 

 

CABLE TV

 

 

 

 

 

SIGNAL

 

 

 

 

 

 

 

 

VCR

 

(OR SIMILAR DEVICE)

Page 32 Page 34
Image 33
Page 32 Page 34
Contents
DFU Warranty Verification Safety Instructions Read before operating equipment Table of Contents Text FeaturesHOW to Adjust the TV Picture Buttons to adjust the selected controlUse the Cursor Left Button again to highlight the time indicator area Setting the TV’S ClockPress the Numbered buttons To enter the correct time. UsePress the Menu button on Activating the TV’S on Timer ControlButton again to highlight the channel indicator area Selecting the TV’S on Timer ChannelSetting the TV’S on Timer Start Time To enter the desired start up timeUse the Cursor UP or CUR Setting the TV’S on Timer Display Using the Smart Lock Setup Code Control Using the Smart Lock Block Channel Control Setup Code display as you pressRemote control Enter your four digit access code Turning on the Noise Reduction Picture Control Press the Cursor DownPress the Cursor UP or Cursor Down buttons to Turning on the Contrast + Control Turn the Contrast + feature on or OFFTo highlight the Contrast + Control Button again to highlight the Contrast + option areaUsing the Closed Caption Control An on-screen count down will Using the Sleep Timer ControlUsing TREBLE, BASS, and Balance Sound Controls Press the Cursor Down button to select the SoundMenu HOW to SET the TV for Stereo Programs This TV will set the Stereo feature automaticallyButton to select the Sound menu Using the TV Volume BAR Control Using the Incredible Stereo FeaturePress the Volume + or Press the Volume + or butPress the Cursor Down button to select the Speaker Using the TV Speaker Control and Audio Output JacksConnect the Video yellow HOW to USE the AUDIO/VIDEO Input JacksTurn the VCR and the TV Use the A/V button onTurn the VCR or Digital Video Disc Player on Connect the S-VIDEOUsing the Smart Picture Control Press the Smart PicturePress the Smart Picture button repeatedly to select either Press the Smart Sound but Using the Smart Sound ControlPress the Smart Picture button repeatedly to turn the fea Ture on or OFFPress the Channel + or Using the TV’S Channel Surf ControlPress the Surf button on Press the Cursor LeftIs necessary Setting the Remote Control to Work with Other DevicesPress the VCR Record Place the TV/VCR/ACCPress the Smart Sound Enter the THREE-DIGITPress the Power button on Mode Switch in the proper posi TionDevice your are attempting to program to turn it on Remote Vcrcode no Remote Control Direct Entry CodesRemote Dvdcode no Using the REMOTE’S VCR Buttons Connect the Video OUT Using the PIP PICTURE-IN-PICTURE FeatureMove to the next page after VCR to TV PIP connections have been completedPress the PIP ON/OFF but Turn the TV and VCR orPress the PIP Source but AV 1, AV 2, SVID-R for picturePress the PIP ON/OFF button Press the PIP ON/OFF butPressing the ON/OFF button a Press the PIP PositionAdjusting the PIP Color and Tint First use an optional signal More PIP PICTURE-IN-PICTURE ConnectionsOn the VCR to the Video in jack on the TV Connect the ANT OUT jack on First connect the original cableRear of the VCR to the ANT a input on the rear of the TV Connect the yellow Video CableTips if Something Isnt Working Glossary to Television Terms Index Philips Consumer Electronics Company Georgia North Carolina Illinois Limited Warranty