Sound

Smart sound Equalizer Volume

Headphone volume Surround mode (Dual I-II) (Mono/Stereo) (Digital/Analogue) (3D effect)

AVL Delta volume

&Press the cursor right to select Sound.

éSelect the menu items in the Sound menu with the cursor up/down and adjust the settings with the cursor left/right.Remember, control settings are at normal mid-range levels when the bar scale is centred.

Smart sound

Select Smart sound to display a list of predefined sound settings, each corresponding with specific factory settings of Treble and Bass. Personal refers to the personal preference settings of sound in the sound menu.

Notes:

-Dual X is only selectable with dual sound transmission.

-Mono/Stereo is only selectable in case of analogue stereo transmission.

-Digital/Analogue is only selectable in case of Digital transmission.

-Surround modes can not be modified when a headphone has been connected.

Surround Modes

Dependent on the sound signal broadcasted, select one of the Surround modes.

Stereo

This mode reproduces only the left and right front sound signals.

You only hear a stereo sound if the broadcast which you are receiving is transmitted in stereo or digital stereo.

Dolby 3 Stereo

Hall

The special sound signal is distributed over the rear

loudspeakers which

creates a hall effect from

the rear.

The centre loudspeaker does not reproduce any signal.

This mode is recommended when you wish to add surround sound to a broadcast which is not encoded Dolby Surround or to a mono signal.

Pro Logic

(optimal with Dolby Surround broadcasting)

The sound signal is now distributed over the front left, the front right and the centre TV loudspeakers.

The rear loudspeakers do not produce any signal.

3D Surround

(optimal with Dolby Surround broadcasting)

3D Surround enables you to experience the effect of

Dolby Surround Pro Logic*

without the need of having

rear speakers connected or activated.The graphical

representation of the rear loudspeakers is replaced by the symbol ®r.

Select the level of 3D effect with the cursor left/right.

(with Dolby Surround broadcasting)

In addition to the left and right internal speakers, the

centre and the rear

surround loudspeakers

reproduce the Dolby Surround Pro Logic sounds.

This sound is always present in the movie or programme marked with G Dolby Surround.This mode is especially recommended for such programmes or movies.Dolby Pro Logic signals are also present on some DVD tracks. Note: Normal stereo broadcast is not always encoded to produce a rear surround sound.

Pro Logic and Hall can only be reproduced if Surround speakers is set to Yes in the Setup, Speaker menu, p. 8, and rear speakers are connected.