Features menu, Channel list, Child lock

With two extra front loudspeakers connected

To enhance the sound reproduction of your TV you may connect two extra front loudspeakers via an external amplifier. See Connect Peripheral Equipment, Connect external speakers/amplifier, p. 21.

In the Surround modes + ext. amp is added to indicate that you should switch on your amplifier as in these modes the internal TV speakers produce only centre sound.The subwoofer speaker is muted.

Note: If extra front speakers are connected and selected, all internal TV speakers produce centre sound in the surround modes Pro Logic*, Dolby 3 Stereo and 3D Surround.

‘Dolby’ ‘Pro Logic’ and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories Licensing Corporation.

Features menu

Features

Channel list
Subtitle
Sleeptimer	Lock
Child lock	Custom lock	Channel lock
On timer	Unlock

&Press the cursor right to select Features.

éSelect the menu items with the cursor up/down and adjust the settings with the cursor left/right.

Use the on-screen Menu-Info i for more information about the menu items.

Channel list

Press the OK key to switch over to the selected TV channel or external.

Select subtitles

The subtitle page must be stored for each TV channel:

Switch on teletext and select the proper subtitle page from the index. Switch off teletext.

Subtitle On will automatically display them on the selected TV channels if subtitles are in the transmission. A symbol will indicate that the mode is on.

Select On during mute when you want to have the subtitles automatically displayed only when the sound has been muted with the ¬ key on the remote control.

Child lock

&Select Child lock.

éPress the cursor right to enter the Child lock menu.You’re summoned to enter your code. Note:You have to re-enter your code each time you enter the child lock menu.

Important:You have forgotten your code !

•Select Cancel with the cursor down.

•Select Set/Change code in the Setup menu. See General menu, Set/Change code, p. 9.

•Press OK.

•Press the cursor right and enter the overriding code 8-8-8-8.

•Press the cursor again and enter a new personal 4-digit code.The previous code is

erased and the new code is stored. Note:The overriding code only works in the Set/Change code menu.

“Select one of the menu items of the child lock menu:

•Lock if you want to lock all channels and externals.

•Custom lock and press the cursor right. Select:

-Channel lock if you want to lock a certain TV channel or external;

•Unlock to disable all locks you have set.