MASTER ENABLE AND CHILD LOCK CONTROL
arental control includes Master Enable and Child Lock features. Master Enable is a | ,, | ,, |
master switch for |
PParental Control. Parental Control cannot take effect unless Master Enable is activated. When a password is set, Master Enable is automatically enabled.
NOTE: the following menu illustrations are given for Analog mode only.
Follow these steps for Digital Mode and Analog Mode.
Press MENU button on the remote control to display onscreen menu.
Press CURSOR 
or 
to scroll through the onscreen menu until you see Parental Control
highlighted. Press CURSOR |
| or and you are |
required to enter the password you have set. If | ||
you enter a,,wrong password, | ,, | Incorrect |
Password! will appear. Then you have to try again. Only with a correct password, you have access to
PARENTAL CONTROL menu. Within the Parental Control menu, you can see Master Enable is set to 
.
Press CURSOR 
or 
to highlight Master Enable. If you use CURSOR 
or 
to change the setting of Master Enable to 
, Master Enable is deactivated and then password protection is cancelled.
Press CURSOR 
or 
to highlight Child Lock.
If you want to lock the buttons on the front panel, use CURSOR
or 
to set to 
. Then the
message ,,Child Lock! Press any key to remove
,,
this message will appear when any button on the front panel is pressed. And you can operate the TV with the remote control only.
When finished, press CLEAR button to clear the menu from the TV screen.
MAIN MENU
Exit
Picture
Setup
Parental Control
Time
Go back
Password | _ _ _ _ |
PARENTAL CONTROL
Go back
Master Enable
Child Lock
Change Password
PARENTAL CONTROL
Go back
Master Enable
Child Lock
Change Password
NUMERIC 
OK
19