|
| TROUBLESHOOTING TIPS |
| SYMPTOMS | SUGGESTED STEPS TO TAKE |
Settings | Error messages |
|
| appear on the |
|
| screen of TV: |
|
| No Signal | Check that the antenna / cable is connected properly and that you have selected the correct |
|
| source type (refer to page 11). |
| No Program | There could be temporarily no transmission on the selected channel.When transmission is |
|
| resumed or when available, your TV will receive it. |
| Audio Only | The current channel has only audio transmission. |
Sound | Sound is not in | This could be due to any of the following reasons: |
| Stereo. | 1. Not all transmitted broadcasts by the cable or broadcast stations are in STEREO.Try checking |
|
| with several major network stations to be sure that the station you selected is in STEREO. |
|
| 2. When using an AV input, the television will not display STEREO even though it is producing |
|
| stereo sound. |
Sound | Disturbing sound | It is normal to hear a disturbing sound (such as buzzing, clicking, cracking, humming, whistling, etc) |
| (such as buzzing, | from a distance less than 2 meters (6 feet) with the television sound muted. |
| clicking, cracking, | If problem occurs on one channel, you may have a signal problem. Please contact the cable provider |
| humming, whistling | or local broadcaster regarding the specific channel. |
| etc.) |
|
General | No power to the | Check the TV power cord. Unplug the power cord from the TV, wait 10 seconds, then reinsert |
| TV | the plug into your wall outlet. Power On the TV again. |
|
| Plug the power cord directly to the wall socket and not via an extension cord. |
|
| If you need to use an extension cord, check that the fuse on the AC power strip is not blown. |
General | TV is not | Ensure the batteries are inserted into the remote control according to the illustration in the |
| responding to | battery compartment (refer to page 7). |
| Remote Control | Reset the TV by disconnecting the power plug from the wall outlet for 10 seconds and then |
|
| |
|
| reconnecting it again. |
General | No picture to the | Check antenna connections. Are they properly secured to the TV ANT 75 ohm plug? |
| TV | Check the SOURCE TYPE control for the correct tuner setting. |
|
| |
|
| Try running the Auto Channel Search feature to find all available channels (refer to page 9). |
|
| Press the SOURCE button on the remote control to make sure the correct signal source is |
|
| selected (FRONT,AV1, CVI, Current Channel, etc.). |
General | TV displays white | Some DVD discs are encoded with as much as 30% more video information to give the best |
| lines in letterbox | possible picture quality. With the DVD player in the 16:9 picture format, the playback of this |
| when viewing a | type of disc with extra video information can produce a number of small white lines in the |
| DVD disc. | upper portion of the black letterbox area. With some of these discs, this problem is inherent |
|
| and does not require a service call. |
29