Philips 20PT9007D First Time YOU Turn on the TV, Please follow the procedure in the next

FIRST TIME YOU TURN ON THE TV

he first time you turn on the new TV set, you will see a screen that helps you to auto install the programs. Auto Tinstallation starts with the analogue channels followed by the digital channels. The time taken for installation

depends on the number of channels available. During installation, if you press the CURSOR button on the remote control you stop the installation process. The channels that are already found are kept. When searching completes, the information about how many Analog channels and Digital channels are found will appear on the screen.

Note :This screen will only appear the first time you turn on the TV. If you wish to auto install programs later,

please follow the procedure in the next page (page 9).

Please connect Antenna or Cable to TV. Select TV signal by or

arrow key and press ok

Antenna

Cable

Installation may take about 30 minutes

OK

Follow the instructions on this screen to start auto installation:

Press CURSOR or to select Antenna or Cable.

Press OK button to confirm and start auto installation.

HELPFUL HINTS

ANTENNA : If you have an off-air or roof-top antenna, select Antenna.

CABLE : If you have subscribed to cable signal from any cable company, or you are receiving free-to-air cable channels through your wall connection select Cable.

The first-time installation will install both Digital and Analog channe ls.

8