Auto Channel Search

ou can auto install programs on your TV. This makes it easy for you to select only the TV stations in your area Ywhen the CHANNEL (+) or (-) buttons are pressed.

Follow these steps for Digital Mode and Analog Mode.

Complete the antenna or cable signal connection

before activating AUTO CHANNEL SEARCH.
	,,			,,
See		How to make the best connection guide for

details.
Press MENU button on the remote control to
display onscreen menu.
Press CURSOR			or	to scroll through the
onscreen menu until you see Setup highlighted.
Press CURSOR			or	to display the SETUP
menu features.

Press CURSOR or to scroll through the

setup features until you see Auto Channel Search highlighted.

Press CURSOR or to display the Auto Channel Search menu features. Use CURSOR or to highlight Start Search.

Press CURSOR or and auto channel search will begin. This may take some time depending on the number

of channels available. Analog channels searching completes

followed by digital channels . During searching, pressing CURSOR will stop the process but with all already found channels kept. When searching completes, the information about how many Analog channels and Digital channels are found will appear on the screen.

MAIN MENU

Exit

Picture

Setup

Parental Control

Time

SETUP

Go back

Auto Channel Search

Channel Edit & Name

Closed Caption
Favorite List
Language	Eng.
Format	4 : 3
Auto Vol. Level	On

Auto Channel Search

Go back
Source Type	Cable
Start Search

HELPFUL HINTS

When Cable is selected, channels 1 to 135 are available

in Digital Mode and channels 1 to 125 are available in

Analog Mode.

When Antenna is selected, channels 2 to 69 are available for both Digital and Analog Modes.

CLEAR

When you are in Digital Mode, channel numbers will be displayed as 1-2, or 2-35 etc.

Whether you selected either Cable or Antenna mode,

both Digital and Analog channels will be installed.