AUTOMATIC PROGRAM
You can program the TV to automatically set itself for local area (or Cable TV) channels. This makes it easy for you o select only the TV stations in your area when the CHANNEL (+),
Follow these steps for Digital Mode | Follow these steps for Analog Mode |
Digital Mode | Analog Mode |
Complete the antenna |
|
or cable signal connection |
|
1 before activating |
|
AUTO PROGRAM |
|
Press MENU on the remote |
|
control to display the |
|
2 onscreen menu. |
|
3Press CURSOR < or > to scroll though the onscreen
menu until you see Install highlighted.
| Press CURSOR > to display |
4 the Install menu features. | |
5 | Press CURSOR < or |
> to scroll through the | |
Install features until you see | |
| Auto Program highlighted. |
| Press CURSOR > to start |
| the select antenna or cable |
6 mode. |
Autoscan will begin. This may |
|
take 20 to 40 min utes |
|
7 depending on the number of |
|
channels available. When |
|
finished, press MENU twice |
|
to exit the menu display from |
|
the TV screen. |
|
Press A/D to switch between |
|
Digital and Analog channels to |
|
8 view your programs. | MENU |
| A/D |
1
2
3
4
5
6
7
8
Complete the antenna or cable signal connection
before activating
AUTO PROGRAMPress MENU on the remote control to display the
onscreen menu.
Press CURSOR < or > to scroll though the onscreen menu until you see Install highlighted.
Press CURSOR > to display the Install menu features.
Press CURSOR < or >
to scroll through the Install
features until you see Auto
Program highlighted.
Press CURSOR > to select
antenna or cable mode.When finished, press MENU twice to exit the menu from the TV screen.
Press A/D to switch between Digital and Analog channels to view your
programs.
>
>
< >
HELPFUL HINTS
When CABLE is selected, channels
When ANTENNA is selected, channels
When you install in Digital mode, it will install both Digital and Analog channels
10