CHILD LOCK
arental control includes a Child Lock feature. This option allows you to enable or disable the buttons on the front panel of TV. When the buttons on the front panel are disabled, you can operate the TV with the remote control only. Once you have entered your password, the Parental Control features are displayed on the screen.
NOTE: the following menu illustrations are given for Analog mode only.
Press CURSOR | or | until you see Settings highlighted. |
Press CURSOR | or | to display the PARENTAL |
CONTROL SETTINGS menu. | ||
Press CURSOR | or | to highlight ChildLock. If you want |
to lock the buttons on the front panel, use CURSOR 
or
to check the box. Then the message | ,, | Front Panel ,, |
Blocked! Press any key to remove this message. | ||
will appear when any button on the front panel is pressed. And you can operate the TV with the remote control only.
When finished, press CLEAR button to clear the menu from the TV screen.
PARENTAL CONTROL
Go Back
Lock
Settings
Change Passwd.
Par. Controls are active!
PARENTAL CONTROL SETTINGS
Go Back
USA
Block CH
ChildLock
CHANGE PASSWORD
ou can change password at any time. Once you have entered your password, the Parental Control features are Ydisplayed on the screen.
Press CURSOR 
or 
until you see Change Passwd. Highlighted.
Press NUMERIC buttons to enter a new password.You have to enter the new password twice so that it can be confirmed.You can use CURSOR 
or 
to clear what you entered and
NOTE: Remember this code which you have set. You can use this code to access the Parental Control features in both Digital and Analog mode.
PARENTAL CONTROL
Go Back
Lock
Settings
Enter New Password
HELPFUL HINTS
If you forget the password, you can reset it with key combinations:
Put the TV to Standby mode first, then press the VOL- button on the front panel and the Clear button on the remote control at the same time and hold them for 5 seconds.
21