Philips 7819901511 manual Subtitle/Audio, Information, Select ‘Angle’, then press OK

A-B Repeat

1.Select ‘A-B Repeat’, then press OK.

2.When playback reaches the beginning of your desired session, press  to select ‘Point A’, then press OK.

Playback_02_01

3.When playback reaches the end of the desired session, press  to select ‘Point B’, then press OK.

Repeat from point A to point B will start.

4.To cancel the repeat mode, press  to select ‘Cancel’, then press OK.

If you exit the function, setting only point A, the preset point A will still be valid when you enter the ‘A-B Repeat’ function next time.

The ‘Cancel’ function is only available when both point A and point B are set.

The ‘A-B Repeat’ setting will be canceled when you bring the program to a marked stop or a full stop.

..........................................................................................

Subtitle/Audio

Some pre-recorded DVD discs have more than one subtitle/audio language. The language initially selected for playback will be the one you select when you first set up the DVD recorder. Nevertheless, you can change the subtitle/audio language of the disc at any time.

Introducing System Setup (p.12)

1.Select ‘Subtitle’/ ‘Audio’, then press OK. All the available subtitle/audio languages will be displayed.

Playback_02_03

Playback_02_05

When VCD/SVCD is selected for playback, audio op- tions will be: ‘Normal’, ‘Left’ and ‘Right’.

2.Select a language, then press OK.

..........................................................................................

Angle

Some pre-recorded DVD discs contain scenes which have been shot from different camera angles. You can choose to view these camera angles during playback.

1.	Select ‘Angle’, then press OK.	Playback
2.	Select a camera angle, then press OK.

Playback_02_06

..........................................................................................

Information

During playback, you can select to show the disc informa- tion on the top of the screen or to hide it.

1.Select ‘Information’, then press OK.

2.Select ‘On’ or ‘Off’, then press OK.

Playback_02_07

If you select ‘On’, disc information will be displayed on the top of the screen.

Different categories of information will be shown depending on the media type.

33