Philips 7819901511 Setting the G-Code System, Fine-Tuning TV Channels, Setting up G-Code System

Started_Advanced_02_09

The channel selected will then be switched on or off.

3.To switch on or off other channels, repeat steps 1-2 to complete the settings.

..........................................................................................

Fine-Tuning TV Channels

After you have performed the channel scanning, you may like to fine-tune the TV channel signal manually. Follow the steps listed below to complete the function.

1.Press  to select a channel from the list, then press OK.

2.Press  to select ‘Fine Tune’, then press OK.

3.Press  or the number buttons (0-9), then press OK to fine-tune the channel signal.

Started_Advanced_02_10

4.When completed, press  to select ‘Exit’ or another option to continue, then press OK.

Setting the G-Code System

The G-Code system is a specially-designed

feature for recording TV programs. The system greatly simplifies the timer recording process, as it does not require users to enter program information, such as date, channel number and start/end time, which are all contained in G-Code programming numbers. You can complete the timer recording setup simply by inputting the G-Code number, which can be found in most newspapers, TV listing magazines or online sources.

Setting up G-Code

System

As channel numbers may vary depending on where you live, it is suggested that you build up a matching channel list when you first set up the DVD recorder. This step will help you to make use of the G-Code system for future timer recording settings.

1.Press TV(MODE) or press SOURCE to set ‘TV’ as the signal source.

2.Press EDIT to display the Channel Editor menu.

3.Press  to select a TV channel, then press OK.

4.Press  to select ‘GCN’, then press OK.

Started_Advanced_03_01

The dialogue box for entering GCN will appear.

5.Press the number buttons (0-9) to enter the GCN (guide channel number), which is the channel number used by the G-Code system, then press OK.

6.To set GCN for other channels, repeat steps 3-5.

7.When completed, press  to select ‘Exit’, then press OK.

18