Philips 7819901511 manual Troubleshooting

	Problem	Possible Solution
Sound	No sound.	•	Check whether the audio cable is well connected.
		•	Check if the audio cable is damaged.
		•	Check whether the input source setting on the amplifier is correct.
		• There is no sound when playback is paused or is under scanning mode or is set
			for slow motion.
			Press PLAY to resume regular playback.
		• If the audio signal does not come through the DIGITAL OUT jacks, please
			check whether related settings (on the System Setup menu) for the digital
			audio output are correct.
	The sound from	•	Check whether the audio cable is well connected.
	the recorder is not	•	Check if the audio cable is damaged.
	presented properly or
		•	Make sure the amplifier/receiver or TV is set to the correct input and the
	is distorted.
			volume is switched on.
		•	If the sound is distorted, try cleaning the cable plugs.
Playback	Cannot play back	•	Check if the disc is required to be finalized.
	recordings using this	• Discs recorded with copy-once material cannot be played on non-CPRM
	recorder or other
			compatible players.
	players
	The recorder starts	•	DVD-Video disc features an auto playback function.
	playing the disc
	automatically.
	No playback on DVD	• Check whether there is any recording on the disc.
	recorder.	•	Check whether the disc inserted contains playable files.
		•	Check whether an unplayable disc is inserted.
		•	Check whether the way you insert the disc is correct. Insert the disc with the
			label side up. If there is no label on the disc, please check with the disc retailer.
		•	Check whether the disc’s region code is the same as that of the recorder.
		•	Check whether the parental control function is switched on. If so, you have to
			unlock it first. (Default code for the function: 0000)
		• Check whether the cables between TV and DVD recorder are well connected.
TV channels	TV channels cannot	•	Switch the input signal source of the recorder to ‘TV’.
	be changed.	•	Check whether the channel scanning process for your TV is completed.
Others	The disc tray does not	•	Contact your local dealer or local authorized service point.
	open/close.
	The recorder fails	•	Switch the recorder off and switch it on again. If the recorder still does not
	to respond to any		respond to any commands, unplug the power cord, reconnect it and switch the
	commands.		recorder on again. Contact your local dealer or authorized service point, if the
			problem remains.

Troubleshooting

39