Philips DVDR 725H/00, DVDR 725H/02 Video + YPbPr, Cvbs + YPbPr, Please observe the color sequence

Installation

3Select the ' ' symbol using B O or A I and confirm with

C M .

Picture

TV shape	16:09
Black level shift
	Off
Video shift
	ï
SCART video
	RGB

4Select the line 'SCART video' using A I or B O and confirm with C M .

5Select your setting with B O or A I . When the YPbPr output (YUV signal) is switched on, S-video (Y/C) and composite video (FBAS/CVBS) signals can not be simultaneously transmitted. The 'RGB' signal is switched off.

The choices are:

O 'S-video + YPbPr'

Component Video (YUV) and S-Video(Y/C).

GUIDE Plus+® menus only available on YUV ouput sockets.

O 'CVBS + YPbPr'

Component Video (YUV) and Composite Video (FBAS/CVBS). GUIDE Plus+® menus only available on YUV ouput sockets.

With all other settings, the signal is switched off at the COMPONENT VIDEO OUT R sockets. This will also be displayed as information on the screen.

For more information on the other settings, refer to 'Picture settings' ('SCART video') in chapter 'User preferences/Settings II'.

6Confirm with OK L .

7Use a component video cable H to connect the red, blue and green cinch sockets COMPONENT VIDEO OUT R at the back of the DVD recorder to the corresponding three component video (interlaced) input sockets on your TV(usually labelled 'Component Video Input', 'YUV Input', 'YPbPr', 'YCbCr' or 'YUV').

Warning!

Do not confuse these sockets with the five-component RGB sockets (if available) or the yellow video (CVBS/FBAS) socket and the two audio sockets (red/white). The five-component RGB sockets are for the R-G-B-H-V signals (red, green, blue with horizontal and vertical synchronisation impulse).

Please observe the color sequence

The colors of the sockets on the DVD recorder and the connectors must match those on the TV (red-red/blue-blue/green-green). If they don't, the colors of the picture may get mixed up or the picture may not be visible.

8Use an audio (cinch) cable F to connect the red/white cinch socket AUDIO OUT L/R Q at the back of the DVD recorder to the red/white audio input socket on your TV (usually labelled 'Audio in' or 'AV in'. See the instruction manual of your TV.)

9If necessary, switch your TV to the component video (Interlaced) input sockets. If there is a switch on your TV to choose between 'Interlaced' and 'Progressive scan', select 'Interlaced'. 'Progressive scan' is not supported on this DVD-Recorder.

Consult the instruction manual of your TV.

P The menu of the DVD recorder should now appear on the TV screen. If not, check the cable connections and the settings on your TV.

O If necessary, store this setting on your TV.

0End with SYSTEM MENU A .

13