Philips DVDR 725H/02, DVDR 725H/00 manual Manual programmed recordings

Programming a recording (TIMER)

Manual programmed recordings

Preparation:

•) Switch on the TV, and if necessary, select the programme number for the DVD recorder.

•) Switch on the DVD recorder.

1Press TIMER s 7 on the remote control. P The 'Schedule' screen appears.

aI will see some information about the GUIDE Plus+ ® System

bThe GUIDE Plus+® System was not installed yet. Read therefore in the chapter 'The GUIDE Plus+® System' the section 'Set up the GUIDE Plus+® System'.

ShowView Manual Home

Schedule displays programmes for Watch or Record. Press Bto use. Press the Red button for ShowView recording. Press the Green button for Manual recording. Press Dfor Search. Press Cfor Info.

Grid Search Schedule Info

No programmes

2Press the green buttonE .

P The current date will be displayed.

3Enter the date using the number buttons 0..9 .

4Confirm with OK L .

How can I correct wrong entries?

If you have already confirmed the entry with OK L , you can select one of the following functions:

Repeat entry: Green colour button E

Cancel: Red colour button D

5Enter the start time for the show using the number buttons 0..9 . Confirm with OK L .

6Enter the finish time for the TV show using the number buttons 0..9 Confirm with OK L .

7Check the data you entered.

O If necessary, go back a position to change entered data using the green function buttonE .

8Enter the programme number of the TV channel using the number buttons 0..9 .

		Frequency		VPS/PDC	Home
,
Grid		Search		Schedule	Info	ENGLISH
/Record					Freq. Timing
21-Oct	20:00 21:30		BBC1		Once +0

Selecting a TV channel from the listing

You can only use this function if data from the GUIDE Plus+® system is already available.

-Press the yellow function button F . You will see an overview of all channels

-Select the TV channel you want to program using D K , C M , B O , A I . You can browse back or forth using CHANNEL q P , CHANNEL r S .

Programme numbers of the scart sockets 'EXT1' and 'EXT2'

You can also program recordings from external sources.

Control of the recording with 'VPS/PDC' is not possible from the scart sockets.

-Select the corresponding input socket using B O or A I .

'EXT1' ( EXT1 TO TV-I/O N ), 'EXT2' ( EXT2 AUX-I/O M ).

9Confirm with OK L .

Changes using the colour buttons

You can use the colour function buttons to make the following settings. Make sure that the right tile is selected.

'Frequency': Green function button E

'Once': single recordings

'M-F': Repeated daily recordings (Monday to Friday).

'Mon': Repeated weekly recordings (every week on the same day, e.g. Monday).

Activate VPS/PDC ('Timing'): Yellow function button F

Using this button, you can activate (appears) or deactivate ('VPS/PDC' disappears) 'VPS/PDC' in tile 'Timing'

0To end, press TIMER s 7 .

ATo find out how you can go back and change the data, read the section on 'How to change or delete a programmed recording (TIMER)'

If any of the TIMER blocks are in use, 'TIMER' will light up on the recorder display.

66