Philips DMR-EH55 operating instructions Messages On the unit’s display

Page 66

Messages

On the unit’s display

The following messages or service numbers appear on the unit’s display when something unusual is detected during startup and use.

 

 

 

 

Page

DVD

≥The remote control and main unit are using different codes. Change the code on the remote control.

19

(“∑” stands for a number.)

 

 

Press and hold [ENTER] and the indicated number button at the same time for

 

 

 

 

 

 

 

 

more than 2 seconds.

 

 

 

 

 

 

HARD ERR§

≥If there is no change after turning the unit on and off, consult the dealer where the unit was

—

 

 

purchased.

 

 

 

 

 

 

NoERAS

≥You cannot delete items on this disc.

—

 

 

The disc may be damaged. Use a new disc.

 

 

 

 

 

 

NoREAD

≥The disc is dirty or badly scratched. The unit cannot record, play, or edit.

10

 

≥This message may appear when the DVD-RAM lens cleaner has finished cleaning.

10

 

 

Press [< OPEN/CLOSE] on the main unit to eject the disc.

 

 

 

 

 

 

NoWRIT

≥You cannot write to this disc.

—

 

 

The disc may be damaged. Use a new disc.

 

 

 

 

 

 

PLEASE WAIT§

≥There was a power failure or the AC plug was disconnected while the unit was on. The unit is carrying

—

 

 

out its recovery process. This process restores the unit to normal operation. The unit is not broken.

 

 

 

Wait until the message disappears.

 

 

 

 

 

 

PROG FULL§

≥There are already 32 timer programmes. Delete unnecessary timer programmes.

27

SLEEP

≥In order to extend HDD life, the HDD is in SLEEP mode.

9

 

 

 

 

 

SP 35:50

≥Available space on the HDD or disc.

—

LP 151h

 

The example “ SP 35:50” is displayed when less than 100 hours are available and the example “LP

 

“SP”,”LP” and the numbers

 

151h” is displayed when over 100 hours are available.

 

are examples.

 

“SP” and “LP” are recording modes, “35:50” means “35 hours 50 minutes” and “151h” means “151

 

 

 

hours”.

 

 

 

 

 

 

UNFORMAT§

≥You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL or DVD-RW (DVD-

54

 

 

Video format) that has been recorded on other equipment.

 

 

 

Format the disc to use it.

 

 

 

However all the recorded contents on the disc are deleted.

 

 

 

 

 

 

UNSUPPORT§

≥You have inserted a disc the unit cannot play or record on.

4–6

U59

≥The unit is hot.

—

 

 

The unit switches to standby for safety reasons. Wait for about 30 minutes until the message

 

 

 

disappears.

 

 

 

Select a position with good ventilation when installing the unit. Do not block the cooling fan on the

 

 

 

rear of the unit.

 

 

 

 

 

 

U61

≥(When a disc is not inserted) Displays when a malfunction has occurred during recording, playback or

—

 

 

copy. This is displayed when the unit is in the recovery process to return to normal operation; it is not

 

 

 

broken. Once the display clears you can use the unit again.

 

 

 

 

 

 

U88

≥(When a disc is inserted) Displays when there was something unusual detected with the disc while

68

 

 

recording, playback or copy. This is displayed when the unit is in the recovery process to return to

 

 

 

normal operation; it is not broken. Once the display clears you can use the unit again.

 

 

 

 

 

 

U99

≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby. Now press

—

 

 

[Í/I] on the main unit again to turn the unit on.

 

 

 

 

 

 

H or F

≥There is something unusual. (The service number displayed after H and F depends on the unit’s

—

 

 

condition.)

 

 

≥Check the unit using the troubleshooting guide. If the service number does not disappear, do the

68–72

 

 

following.

 

 

 

1. Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it.

 

 

 

2. Press [Í/I] to turn the power on. (The unit may be fixed.)

 

 

 

If the service number does not disappear despite after doing the above, request service from the

 

 

 

dealer. Inform the dealer of the service number when requesting service.

 

 

 

 

 

 

X HOLD

≥The Child Lock function is activated.

57

 

 

Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” disappears.

 

 

 

 

 

 

§The message are alternately displayed.

RQT8361

66

Page 65 Page 67
Image 66
Page 65 Page 67
Contents ≥The region number of this unit is Illustration shows the model for Australia and N.ZForAustraliaandN.Z ExampleBefore use If you see this symbolHow to replace the fuse ForAsiaandMiddleEastTable of contents DVD Video Recording format HDD, disc and card informationHDD and discs you can use for recording and play DVD-Video formatRecording modes and approximate recording times +R/+RW Video Recording formatHDD, disc and card information +R DLPlay-only discs 12 cm/8 cm Discs that cannot be playedHDD, disc and card information Structure of folders displayed by this unit Cards you can use on this unitSuitable SD Memory Cards TypeImportant notes for recording HDD Hard disk drive handling care Disk drive handling careImportant notes for recording/HDD Hard Disc and card handling Unit careBatteries Use Included accessoriesRemote control information Disc and cardAustraliaandN.Z Remote controlControl reference guide ForAustraliaandN.Z. Show G-CODEscreenControl reference guide Main unitUnit’s display Opening the front panelConnecting a television When the unit is not to be used for a long timeMake sure to use the pair of supplied RF coaxial cables Connecting a television and VCR ConnectionOther connections Connecting an amplifier with a digital input TerminalConnecting a stereo amplifier ConnectionFinished the settings Press 3, 4 to change the settingPress Enter when you have Press 2, 1 to select the item you Want to changePress 3, 4 to select On and press Enter Press 3, 4 to select Connection and pressPress 3, 4 to select Progressive and press Enter To enjoy progressive videoTelevision operation When the following indicator appears on the unit’s displaySet up to match your television and remote control Test by turning on the television and changing channelsPress W X CH to select the channel Recording television programmesPress Drive Select to select the HDD or DVD drive Press ¥ REC to start recordingTo finalize the disc Disc Insertion/EjectionRecording television programmes To open the tray without disc finalizationRecording television programmes Recording settings for High Speed CopyTo specify a time to stop recording- One Touch Recording Press ¥ REC on the main unit to select the recording timePress 3, 4, 2, 1 to select Start and press Enter Flexible RecordingPress F Rec Playing while you are recordingPress G-Code Timer recordingUsing G-CODEsystem to make timer recordings Press the numbered buttons to enter the G-CODEnumberManually programming timer recordings Timer recordingPress PROG/CHECK Press Drive Select to select the recording drive and press To cancel recording when recording has already begunTimer recording Press 2, 1 to select Stop Recording and press EnterCheck, change or delete a programme Relief RecordingAuto Renewal Recording Playing recorded video contents/Playing play-only discs Playing recorded video contents/Playing play-only discs Operations during playManual Skip Changing audio during playPress Audio DivX discs, MP3 discs and still pictures JPEG/TIFF Playing recorded video contents/PlayingPlaying DivX discs, MP3 discs and still pictures JPEG/TIFF Play-only discs/PlayingPress Direct Navigator Selecting file type to playPlaying DivX discs Press 3, 4 to select the title and press EnterStill pictures Playing MP3 discsPress 3, 4 to select the track and press Enter Playing DivX discs, MP3 discsPress Drive Select to select the HDD, DVD or SD drive Playing still picturesPress 3, 4, 2, 1 to select the album and press Enter Go to stepStart Slide Show Slide Show SettingUseful functions during still picture play RotateCommon procedures Using on-screen menus/Status messageUsing on-screen menus Disc menu-Setting the disc contentStatus messages Press StatusPress 3, 4, 2, 1 to select the chapter Editing titles/chaptersEditing titles/chapters and playing chapters If you select Chapter ViewTitle operations Partial DeleteChapter operations Creating playlists Creating, editing and playing playlistsPress 2, 1 to select the source title and press Press ReturnAdd Editing and playing playlists/chaptersPlaylist operations Chapter MoveEditing still pictures Press B to select PicturePress 3, 4 to select the operation and press Enter Press 2, 1 to select number of print 0 to 9 Album and picture operationPress 2, 1 to select Delete and press Enter Editing still picturesPress Delete Delete NavigatorDeleting titles or pictures during play Available disc space after deletingCopying titles or playlists Approximate copying times Max. speedDelete Navigator/Copying titles or playlists Copy Press 3, 4 to select Copy and press EnterPress 2, 1 to select Start and press Enter Copying using the copying list- Advanced Copy Recording and playing while copying To stop copyingTo return to the previous screen To edit the copying listCopying MPEG2 moving pictures from an SD card Setting the unit to copy according to the set timeSet Copy Time MPEG2VIDEO§ HDD DVD-RAMRegister still pictures for copy Copying using the copying listCopying still pictures To register individual still picturesPictures and press Enter Copying all the still pictures on a card- Copy All PicturesPress 3, 4 to select To Others Press 3, 4 to select Copy AllDV automatic recording DV Auto Rec Copying from a video cassette recorderPress ¥ REC Manual recordingHDD, disc and card management Common proceduresSetting the protection Providing a name for a discDeleting all the contents of a disc or card-Format Deleting all titles and playlists-Delete all titlesCreating Top Menu-Create Top Menu Selecting the background style-Top MenuEnabling discs to be played on other equipment-Finalize HDD, disc and card managementPress 3, 4, 2, 1 to select a character and press Enter Entering textShow Enter Name screen Press SetPress 3, 4 to select an item and press Enter Functions windowChild Lock Entering text/FUNCTIONS window/Child LockChanging the unit’s settings OPEN/CLOSETabs Menus Options Disc Summary of settingsChanging the unit’s settings PictureChanging the unit’s settings DTSMpeg Tabs Menus Options Underlined items are the factory presets OthersTuning Press 3, 4 to select Tuning and pressPress 3, 4 to select Manual and press Enter TV System Clock Settings Press Enter when you have finished the settingsClock starts Messages On the televisionMessages On the unit’s display Cover Frequently asked questionsSet up Can I record from a commerciallyTroubleshooting guide Sound No sound 14-16 Low volumeCannot switch audio Distorted soundTroubleshooting guide Troubleshooting guide Preset Copying, deleting and settingTo reset this unit To return all the settings other To reset the ratings levelTroubleshooting guide/Glossary GlossaryRGB Specifications Safety precautions Index
Top Page Image Contents